BYM13-50

BYM13-20 thru BYM13-60, SGL41-20 thru SGL41-60 Vishay General Semiconductor Surface Mount Schottky Barrier Rectifier FEATURES • MELF Schottky rectifier • Ideal for automated placement • Guardring for overvoltage protection • Low power losses, high efficiency • Low forward voltage drop • High surge capability • Meets MSL level 1, per J-STD-020C, LF max peak of 250 °C DO-213AB • Solder Dip 260 °C, 40 seconds • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in low voltage high frequency inverters, freewheeling, dc-to-dc converters, and polarity protection applications MECHANICAL DATA Case: DO-213AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D E3 suffix for commercial grade, HE3 suffix for high reliability grade (AEC Q101 qualified) Polarity: Two bands indicate cathode end 1st band denotes device type 2nd band denotes voltage type MAJOR RATINGS AND CHARACTERISTICS IF(AV) VRRM IFSM VF Tj max. 1.0 A 20 V to 60 V 30 A 0.50 V, 0.70 V 125 °C, 150 °C MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Denotes Schottky devices: 1st band is orange Polarity color bands (2nd band) voltage type Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current (see Fig. Peak forward surge current 8.3 ms single half sinewave superimposed on rated load Voltage rate of change (rated VR) Operating junction temperature range Storage temperature range VRRM VRMS VDC IF(AV) IFSM dv/dt TJ TSTG - 55 to + 125 - 55 to + 150 SYMBOL BYM13-20 BYM13-30 BYM13-40 BYM13-50 BYM13-60 SGL41-20 Gray 20 14 20 SGL41-30 Red 30 21 30 SGL41-40 Orange 40 28 40 1.0 30 10000 - 55 to + 150 SGL41-50 Yellow 50 35 50 SGL41-60 Green 60 42 60 V V V A A V/µs °C °C UNIT Document Number 88548 03-Nov-06 www.vishay.com 1 BYM13-20 thru BYM13-60, SGL41-20 thru SGL41-60 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL VF TA = 25 °C TA = 100 °C at 4.0 V, 1.0 MHz BYM13-20 SGL41-20 BYM13-30 SGL41-30 0.50 0.5 IR 10 110 5.0 80 mA BYM13-40 SGL41-40 BYM13-50 SGL41-50 BYM13-60 SGL41-60 UNIT V Maximum instantaneous at 1.0 A forward voltage (1) Maximum reverse current at rated DC blocking voltage (1) Typical junction capacitance Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle 0.70 CJ pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum thermal resistance (1) Note: (1) Thermal resistance junction to terminal, 0.24 x 0.24" (6.0 x 6.0 mm) copper pads to each terminal SYMBOL RθJA RθJT BYM13-20 SGL41-20 BYM13-30 SGL41-30 BYM13-40 SGL41-40 75 30 BYM13-50 SGL41-50 BYM13-60 SGL41-60 UNIT °C/W ORDERING INFORMATION PREFERRED P/N SGL41-40-E3/96 GL41-40-E3/97 BYM13-40-E3/96 BYM13-40-E3/97 UNIT WEIGHT (g) 0.114 0.114 0.114 0.114 PREFERRED PACKAGE CODE 96 97 96 97 BASE QUANTITY 1500 5000 1500 5000 DELIVERY MODE 7" Diameter Plastic Tape & Reel 13" Diameter Plastic Tape & Reel 7" Diameter Plastic Tape & Reel 13" Diameter Plastic Tape & Reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1.0 30 Resistive or Inductive Load At Rated Td 8.3 ms Single Half Sine-Wave 25 0.75 SGL41-20 - SGL41-40 P.C.B. Mounted on 0.24 x 0.24" (6.0 x 6.0 mm) Copper Land Areas Peak Forward Surge Current (A) Average Forward Current (A) 20 0.50 SGL41-50 & SGL41-60 15 0.25 10 0 0 25 50 75 100 125 150 175 5 1 10 100 Terminal Temperature (°C) Number of Cycles at 60 Hz Figure 1. Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 Document Number 88548 03-Nov-06 BYM13-20 thru BYM13-60, SGL41-20 thru SGL41-60 Vishay General Semiconductor 50 400 Instantaneous Forward Current (A) Tj = 125 °C Tj = 150 °C Pulse Width = 300 µs 1 % Duty Cycle 1 Tj = 25 °C Junction Capacitance (pF) 10 Tj = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 100 0.1 SGL41-20 - SGL41-40 SGL41-50 & SGL41-60 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 SGL41-20 - SGL41-40 SGL41-50 & SGL41-60 10 0.1 1 10 40 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance 100 Instantaneous Reverse Current (mA) SGL41-20 - SGL41-40 SGL41-50 & SGL41-60 10 Tj = 125 °C 1 0.1 Tj = 75 °C 0.01 Tj = 25 °C 0.001 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Characteristics PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-213AB SOLDERABLE ENDS 1st BAND +0 D2 = D1 - 0.008 (0.20) D2 D1= 0.105 0.095 (2.67) (2.41) 0.022 (0.56) 0.018 (0.46) 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185(4.7) 1st band denotes type and positive end (cathode) Document Number 88548 03-Nov-06 www.vishay.com 3 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1