FMMT92CSM_07

FMMT92CSM MECHANICAL DATA Dimensions in mm (inches) 0.51 ± 0.10 (0.02 ± 0.004) 0.31 rad. (0.012) GENERAL PURPOSE PNP TRANSISTOR IN A HERMETICALLY SEALED CERAMIC SURFACE MOUNT PACKAGE FEATURES • GENERAL PURPOSE PNP TRANSISTOR A 1.40 (0.055) max. 2.54 ± 0.13 (0.10 ± 0.005) 3 2 1 1.91 ± 0.10 (0.075 ± 0.004) 3.05 ± 0.13 (0.12 ± 0.005) A= 0.76 ± 0.15 (0.03 ± 0.006) 0.31 rad. (0.012) • HERMETIC CERAMIC SURFACE MOUNT PACKAGE • CECC SCREENING OPTIONS 1.02 ± 0.10 (0.04 ± 0.004) SOT23 CERAMIC (LCC1 PACKAGE) Underside View PAD 1 – Base PAD 2 – Emitter PAD 3 – Collector ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO VCEO VEBO IC Ptot TjTstg Collector – Base Voltage Collector – Emitter Voltage Emitter – Base Voltage Continuous Collector Current Power Dissipation @ Tamb = 25°C @ Tcase = 25°C Operating and Storage Temperature -300V -300V -5V -500mA 680mW 1.8W –55 to 175°C THERMAL CHARACTERISTICS Parameter Rth(j-amb) Thermal Resistance Junction to Ambient Rth(j-case) Thermal Resistance Junction to Case Max. 350 80 Unit °C/W °C/W Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5629 Issue 1 FMMT92CSM ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise stated) Parameter V(BR)CBO V(BR)CEO V(BR)EBO ICBO IEBO VCE(sat) VBE(sat) hFE Collector – Base Breakdown Voltage Emitter – Base Breakdown Voltage Collector Cut-off Current Emitter Cut-off Current Collector – Emitter Saturation Voltage Emitter Saturation Voltage Static Forward Current Transfer Ratio Test Conditions IC = -100μA IE = -10μA VCB = -200V VEB = -3V IC = -20mA IC = -20mA IC = -1mA IC = -10mA IC = -30mA VCE = -20V f = 20MHz VCB = -20V f = 1MHz IE = 0 IB = 0 IC = 0 IE = 0 IE = 0 IB = -2mA IB = -2mA VCE = -10V* VCE = -10V* VCE = -10V* IC = -10mA Min. -300 -300 -5 Typ. Max. Unit V V V -0.25 -0.1 -0.5 -0.9 μA V Collector - Emitter Breakdown Voltage IC = -1mA* 25 40 25 50 6 MHz pF — fT Cobo Transition Frequency Output Capacitance * Pulse Test: Pulse Width = 200μs, Duty Cycle ≤ 2%. Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5629 Issue 1