IRF9240SMD

IRF9240 IRFN9240 IRF9240SMD MECHANICAL DATA Dimensions in mm (inches) 25.15 (0.99) 26.67 (1.05) 10.67 (0.42) 11.18 (0.44) 1.52 (0.06) 3.43 (0.135) 6.35 (0.25) 9.15 (0.36) P–CHANNEL POWER MOSFET IRF9240 38.61 (1.52) 39.12 (1.54) 0.97 (0.060) 1.10 (0.043) D 22.23 (0.875) max. 29.9 (1.177) 30.4 (1.197) 16.64 (0.655) 17.15 (0.675) 1 2 3 (case) 3.84 (0.151) 4.09 (0.161) 7.92 (0.312) 12.70 (0.50) G S FEATURES • P–CHANNEL POWER MOSFET 3 .6 0 (0 .1 4 2 ) M ax. TO–3 Package (TO-204AA) Pin 1 – Gate Pin 2 – Source 3 .7 0 (0 .1 4 6 ) 3 .4 1 (0 .1 3 4 ) 4 .1 4 (0 .1 6 3 ) 3 .8 4 (0 .1 5 1 ) 0 .8 9 (0 .0 3 5 ) m in . 3 .7 0 (0 .1 4 6 ) 3 .4 1 (0 .1 3 4 ) Pin 3 – Drain IRFN9240SMD • HIGH VOLTAGE • INTEGRAL PROTECTION DIODE • AVAILABLE IN TO-3 (TO-204AA) AND CERAMIC SURFACE MOUNT SMD1 (TO276AB)PACKAGE 1 3 0 .7 6 (0 .0 3 0 ) m in . 1 0 .6 9 (0 .4 2 1 ) 1 0 .3 9 (0 .4 0 9 ) 2 9 .6 9 .3 1 1 .5 1 1 .2 7 (0 8 (0 8 (0 8 (0 .3 8 .3 6 .4 5 .4 4 1) 9) 6) 4) 1 6 .0 2 (0 .6 3 1 ) 1 5 .7 3 (0 .6 1 9 ) 0 .5 0 (0 .0 2 0 ) 0 .2 6 (0 .0 1 0 ) SMD1 (TO276AB) Pin 1 – Gate Pin 2 – Drain Pin 3 – Source Note: IRF9240SMD also available with pins 1 and 3 reversed on SMD 1 package. ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VDSS VDGR VGS ID IDM PD Tj Tstg Drain – Source Voltage Drain – Gate Voltage (RGS = 20KΩ) Gate – Source Voltage Continuous Drain Current @ Tcase = 25°C @ Tcase = 100°C Pulsed Drain Current Max. Power Dissipation @ Tcase = 25°C Linear Derating Factor Operating Junction and Storage Temperature Range –200V –200V ±20V –11A –7.0A –44A 125W 1W / °C –55 to 150°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3345 Issue 2 IRF9240 IRFN9240 IRF9240SMD ELECTRICAL RATINGS (Tcase = 25°C unless otherwise stated) BVDSS VGS(TH) IGSS Characteristic Drain – Source Breakdown Voltage Gate Threshold Voltage Gate – Source Leakage Current (forward) Gate – Source Leakage Current (reverse) Zero Gate Voltage Drain Current Test Conditions VGS = 0V , ID = –1mA VDS = VGS , ID = –250µA VGS = –20V VGS = 20V VDS = -160V , VGS = 0V IDSS VDS = -160V VGS = 0V , Tcase = 125°C ID(ON) RDS(ON) gfs Ciss Coss Crss Qg Qgs Qgd td(on) tr td(off) tf LD LS On State Drain Current 1 Static Drain – Source On-State Resistance Forward Transconductance 1 Input capacitance Output capacitance Reverse transfer capacitance Total Gate Charge Gate – Source Charge Gate – Drain (“Miller”) Charge Turn–on Delay Time Rise Time Turn-off Delay Time Fall Time Internal Drain Inductance Internal Source Inductance Min. (TO-3 package only) (TO-3 package only) Test Conditions Min. 300 Typ. Max. –11 –44 VGS = 0V , IS = – 11A Tcase = 25°C IF = –11A , dlF / dt = 100A/µs Tj = 25°C IF = –11A , dlF / dt = 100A/µs Tj = 25°C 270 2.0 –4.6 VDS > ID(ON) x RDS(ON) Max VGS = –10V VGS = –10V , ID = –7A VDS > ID(ON) x RDS(ON) Max ID = –7A VGS = 0V VDS = –25V f = 1MHz VGS = –10V ID = –11A VDS = -100V VDD = -100V ID = –11A ZO = 9.1Ω 5.0 12.5 Typ. 28 3.0 4.5 4 –11 0.35 6 1200 570 81 60 15 38 35 85 85 65 nH nH Max. Unit 1.0 °C/W 30 °C/W °C Unit A V ns µC ns nC pF 0.5 Min. –200 –2 Typ. Max. –4 –100 100 –25 –1 Unit V V nA nA µA mA A Ω S THERMAL CHARACTERISTICS Characteristic RθJC Junction to Case RθJA TL Junction to Ambient Max. Lead Temperature 0.063 ” from case for 10 sec. SOURCE – DRAIN DIODE RATINGS AND CHARACTERISTICS Characteristic Continuous Source Current (Body Diode) IS Pulsed Source Current1 (Body Diode) I SM VSD trr Qrr Diode Forward Voltage2 Reverse Recovery Time Reverse Recovery Charge 1) Pulse Test: Pulse Width < 300µS , Duty Cycle ≤ 2% 2) Repetitive Rating: Pulse Width limited by maximum junction temperature. Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3345 Issue 2