LM79M05AJX

LM79M05AHX LM79M05AJX MECHANICAL DATA 8 .8 9 (0 .3 5 ) 9 .4 0 (0 .3 7 ) 7 .7 5 (0 .3 0 5 ) 8 .5 1 (0 .3 3 5 ) 5 VOLT NEGATIVE VOLTAGE REGULATOR 5 .0 8 (0 .2 0 0 ) ty p . 4 .1 9 (0 .1 6 5 ) 4 .9 5 (0 .1 9 5 )  0 .6 6 (0 .0 2 6 ) 1 .1 4 (0 .0 4 5 ) 0 .8 9 m a x . (0 .0 3 5 ) 7 .7 5 (0 .3 0 5 ) 8 .5 1 (0 .3 3 5 ) d ia . 0 .7 1 (0 .0 2 8 ) 0 .8 6 (0 .0 3 4 ) ! 2 .5 4 (0 .1 0 0 ) FEATURES • 0.01%/V LINE REGULATION 1 2 .7 0 (0 .5 0 0 ) m in . 45° • 0.3%/A LOAD REGULATION • THERMAL OVERLOAD PROTECTION H Package - TO-39 Metal Pin 1 = Ground 0.45 7 ± 0 .102 (0 .0 18 ± 0.00 4) Pin 2 = Vout Pin 3 = Vin • SHORT CIRCUIT PROTECTION • SAFE OPERATING AREA PROTECTION 8 5 • 2% OUTPUT VOLTAGE TOLERANCE 1 4 1.42 2 ± 0.102 (0 . 056 ± 0.00 4) DESCRIPTION 7.899 (0.311) 4 .013 ± 0.4 06 (0.1 58 ± 0.016) 10.287 ± 0 .5 08 (0.4 05 ± 0 .0 20) 7.239 ± 0.305 (0.285 ± 0.012) 1.52 4 (0.060) Ma x. 0 .38 1 (0.01 5) Min . 8.255 ± 0 .6 35 (0 .3 25 ± 0.025 ) 5 .08 (0.2 00) Ma x. The LM79M05AH and LM79M05AJ are 5V negative 0.5A Voltage Regulators providing 0.01% per Volt Line Regulation and 0.3% per amp load regulation. Protection includes safe operating Area current limiting and thermal. 4 .064 (0.1 60) Min. 0.914 (0.036) 2.54 (0.100) 0.27 9 ± 0 .0 51 (0 .011 ± 0.002) 3.68 3 ± 0.508 (0.1 45 ± 0.020) 9.525 ± 0 .635 (0.3 75 ± 0.0 25) 2˚ to 1 3˚ REF * Lead Thickness for tin plate finish only. Solder dip finish adds 2 to 10 mil thickness to all lead tip dimensions. J Package = 8 Pin Ceramic DIP Pin 1 = Ground Pin 2 = N/C Pin 3 = N/C Pin 4 = Vout Pin 5 = N/C Pin 6 = Vin Pin 7 = N/C Pin 8 = N/C ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VI PD Tj Tstg TL Semelab plc. DC Input Voltage VO = -5V Power Dissipation Operating Junction Temperature Range Maximum Junction Temperature Storage Temperature Range Lead Temperature (Soldering, 10 sec) Telephone +44(0)1455) 556565. Fax +44(0)1455) 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk 35V Internally limited –55°C to +125°C 125°C –65°C to +150°C 300°C 1/01 LM79M05AHX LM79M05AJX ELECTRICAL CHARACTERISTICS (Tj = 25°C unless stated) Parameter VO Output Voltage* Test Conditions IO = 100mA IO = 5mA to 350mA Tj = –55 to +125°C IO = 500mA VIN = -10V PD £ PMAX Min. - 4.9 - 4.8 Typ. -5 Max. - 5.1 - 5.2 100 (VIN = -7 to -25V) 50 (VIN = -8 to -12V) VIN = -10V VIN = -10V VIN = -10V 100 3 0.5 1.3 (VIN = -8 to -12V) 100 IO = 500mA 54 60 (VIN = -10) 1.4 2.1 2.5 -0.4 mV mA mA mA mV Unit V (VIN = -8 to -20V) DVO Line Regulation* IO = 500mA DVO Load Regulation* Id Quiescent Current* IO = 5mA to 500mA IO = 350mA IO = 5 to 500 mA Tj = –55 to +125°C IO = 500mA Tj = –55 to +125°C f = 10Hz to 100kHz f = 120Hz Tj = –55 to +125°C IO = 500mA VIN = -10V VIN = -10V IO = 5mA DIQ Quiescent Current Change* VN Output Noise Voltage mV dB V A A mV / °C DVIN Ripple Rejection DVO Dropout Voltage* ISC IPK Short Circuit Current* Peak Output Current* Average Temperature Coefficient of Output Voltage* Tj = –55 to +125°C * Pulse Test: tp £ 10ms , d £ 5%. All characteristics are measured with a capacitor across the input of 0.22mF and a capacitor across the output of 0.1mF. Output Voltage changes due to changes in internal temperature must be taken into account separately. Although power dissipation is internally limited, these specifications apply for up to 2W for the TO–39 package, and 1.05W for the CERDIP (J package). THERMAL DATA RTHj-case RTHj-amb Thermal Resistance Junction – Case Thermal Resistance Junction – Ambient Derate above 25°C TO-39 (H Package) CERDIP (J Package) CERDIP (J Package) 20°C / W Typ. 120°C / W Typ. 8.4 mW / °C Semelab plc. Telephone +44(0)1455) 556565. Fax +44(0)1455) 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk 1/01