MHQ2222

MHQ2222 MECHANICAL DATA Dimensions in mm (inches) Quad Dual-In-Line NPN Silicon Transistors 0.457 ± 0.102 (0.018 ± 0.004) FEATURES • • • V(BR)CEO = 40V (Min) Hermetic Package Screening Options Available 14 8 APPLICATIONS 1 7 • • General Purpose Switching DC to VHF Amplifiers 2.134 (0.084) 1.422 ± 0.102 (0.056 ± 0.004) 0.508 (0.020) Min. ABSOLUTE MAXIMUM RATINGS ( Tc = 25°C unless otherwise stated) VCEO VCBO VEBO IC Collector - Emitter Voltage Collector - Base Voltage Emitter – Base Voltage Collector Current - Continuous Each Transistor 0.65W 3.72mW/° C 40V 60V 5V 500mA Total Device 1.9W 10.88mW/° C PD Power Dissipation at TA = 25° C Derate Above 25° C TJ Tstg Junction Temperature Storage Temperature 200° C -65 to +200° C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk DOC 7964, ISS 1 MHQ2222 ELECTRICAL CHARACTERISTICS (TC =25°C unless otherwise stated) Parameter V(BR)CEO* V(BR)CBO V(BR)EBO ICBO IEBO hFE* Collector-Emitter Breakdown Voltage Collector-Base Breakdown Voltage Emitter-Base Breakdown Voltage Collector-Base Cut-Off Current Emitter-Base Cut-Off Current Test Conditions IC = 10mA IC = 10µA IE = 10µA IE = 0 IC = 0 IC = 10mA IC = 150mA IC = 300mA IC = 150mA IC = 300mA IC = 150mA IC = 300mA IB = 0 IE = 0 IC = 0 VCB = 50V VEB = 3V VCE = 10V VCE = 10V VCE = 10V IB = 15mA IB = 30mA IB = 15mA IB = 30mA Min. Typ. Max. 40 60 5 50 50 75 100 30 0.4 1.6 1.3 2.5 Unit V nA Forward-current transfer ratio VCE(sat)* VBE(sat)* Collector-Emitter Saturation Voltage Base-Emitter Saturated Voltage V DYNAMIC CHARACTERISTICS FT Transition Frequency IC = 20mA f = 100MHz IE = 0 f = 1.0MHz IC = 0 f = 1.0MHz VCC = 30V IC= 150mA VCC = 30V IC= 150mA IB1 = IB2 = 15mA VBE(off) = 0.5V IB1 = 15mA 25 nS 250 VEB = 0.5V VCB = 10V VCE = 20V 200 MHz Cobo Output Capacitance 8 pF 30 Cibo ton Input Capacitance Turn-On Time toff Turn-Off Time * Pulse test tp = 300µs, δ < 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk DOC 7964, ISS 1