SB30-100SSMD

SB30-100SSMD MECHANICAL DATA Dimensions in mm 0 .8 9 (0 .0 3 5 ) m in . 3 .7 0 (0 .1 4 6 ) 3 .7 0 (0 .1 4 6 ) 3 .4 1 (0 .1 3 4 ) 3 .4 1 (0 .1 3 4 ) 4 .1 4 (0 .1 6 3 ) 3 .8 4 (0 .1 5 1 ) 3 .6 0 (0 .1 4 2 ) M ax. 1 3 SCHOTTKY BARRIER DIODE IN SMD1 FOR HI–REL APPLICATIONS 0 .7 6 (0 .0 3 0 ) m in . 1 0 .6 9 (0 .4 2 1 ) 1 0 .3 9 (0 .4 0 9 ) 2 1 6 .0 2 (0 .6 3 1 ) 1 5 .7 3 (0 .6 1 9 ) FEATURES 9 .6 9 .3 1 1 .5 1 1 .2 7 (0 8 (0 8 (0 8 (0 .3 8 .3 6 .4 5 .4 4 1) 9) 6) 4) 0 .5 0 (0 .0 2 0 ) 0 .2 6 (0 .0 1 0 ) SMD1 (TO-276AB)Package • • • • • • HERMETIC CERAMIC PACKAGE ISOLATED CASE SCREENING OPTIONS AVAILABLE OUTPUT CURRENT 30A LOW VF LOW LEAKAGE 1 2 3 Pad 2 = Cathode Pads 1 & 3 = Anode ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VRRM Peak Repetitive Reverse Voltage VRSM VR IO IFSM TSTG TJ RTH(j-c) PD Peak Non-Repetitive Reverse Voltage Continuous Reverse Voltage Output Current Peak Non-Repetitive Surge Current (50Hz) Storage Temperature Range Maximum Operating Junction Temperature Maximum Thermal Resistance Junction To Case Power Dissipation 100V 100V 100V 30A 245A -55°C to 150°C 150°C 0.5°C/W 250W Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5312 Issue 2 SB30-100SSMD ELECTRICAL CHARACTERISTICS (TCASE = 25°C unless otherwise stated Parameter Test Conditions Min. VFM IRM Cd Forward Voltage* Reverse Current* Junction Capacitance δ≤2% IF = 30A IF = 30A VR = 100V VR = 100V VR = 5V TJ = 25°C TJ = 125°C TJ= 25°C TJ= 125°C f= 1MHz Typ. Max. 0.8 0.7 2 25 Unit V mA pF 1400 *Pulse test tp=300µs Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5312 Issue 2