SML100H9

SML100H9 TO–258 Package Outline. Dimensions in mm (inches) 17.65 (0.695) 17.39 (0.685) 6.86 (0.270) 6.09 (0.240) 1.14 (0.707) 0.88 (0.035) 17.96 (0.707) 17.70 (0.697) 13.84 (0.545) 13.58 (0.535) 123 4.19 (0.165) 3.94 (0.155) Dia. 21.21 (0.835) 20.70 (0.815) N–CHANNEL ENHANCEMENT MODE HIGH VOLTAGE POWER MOSFETS VDSS 1000V 9A ID(cont) RDS(on) 1.100Ω 3.56 (0.140) BSC 19.05 (0.750) 12.70 (0.500) 5.08 (0.200) BSC 1.65 (0.065) 1.39 (0.055) Typ. Pin 1 – Drain Pin 2 – Source Pin 3 – Gate • Faster Switching • Lower Leakage • TO–258 Hermetic Package D G S StarMOS is a new generation of high voltage N–Channel enhancement mode power MOSFETs. This new technology minimises the JFET effect, increases packing density and reduces the on-resistance. StarMOS also achieves faster switching speeds through optimised gate layout. ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VDSS ID IDM VGS VGSM PD TJ , TSTG TL IAR EAR EAS Drain – Source Voltage Continuous Drain Current Pulsed Drain Current 1 Gate – Source Voltage Gate – Source Voltage Transient Total Power Dissipation @ Tcase = 25°C Derate Linearly Operating and Storage Junction Temperature Range Lead Temperature : 0.063” from Case for 10 Sec. Avalanche Current1 (Repetitive and Non-Repetitive) Repetitive Avalanche Energy 1 Single Pulse Avalanche Energy 2 1000 9 36 ±30 ±40 200 1.6 –55 to 150 300 9 30 1210 V A A V W W/°C °C A mJ 1) Repetitive Rating: Pulse Width limited by maximum junction temperature. 2) Starting TJ = 25°C, L = 29.88mH, RG = 25Ω, Peak IL = 9A Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. Website: http://www.semelab.co.uk E-mail: sales@semelab.co.uk 6/99 SML100H9 STATIC ELECTRICAL RATINGS (Tcase = 25°C unless otherwise stated) BVDSS IDSS IGSS VGS(TH) ID(ON) RDS(ON) Characteristic Drain – Source Breakdown Voltage Zero Gate Voltage Drain Current (VGS = 0V) Gate – Source Leakage Current Gate Threshold Voltage On State Drain Current 2 Drain – Source On State Resistance 2 Test Conditions VGS = 0V , ID = 250µA VDS = VDSS VDS = 0.8VDSS , TC = 125°C VGS = ±30V , VDS = 0V VDS = VGS , ID = 1.0mA VDS > ID(ON) x RDS(ON) Max VGS = 10V VGS = 10V , ID = 0.5 ID [Cont.] 2 9 1.100 Min. 1000 Typ. Max. Unit V 25 250 ±100 4 µA nA V A Ω DYNAMIC CHARACTERISTICS Ciss Coss Crss Qg Qgs Qgd td(on) tr td(off) tf Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge3 Gate – Source Charge Gate – Drain (“Miller”) Charge Turn–on Delay Time Rise Time Turn-off Delay Time Fall Time Test Conditions VGS = 0V VDS = 25V f = 1MHz VGS = 10V VDD = 0.5 VDSS ID = ID [Cont.] @ 25°C VGS = 15V VDD = 0.5 VDSS ID = ID [Cont.] @ 25°C RG = 1.6Ω Min. Typ. 3050 280 135 150 16 70 12 11 55 12 Max. Unit 3660 390 200 225 24 105 24 22 85 24 ns nC pF SOURCE – DRAIN DIODE RATINGS AND CHARACTERISTICS IS ISM VSD trr Qrr Characteristic Continuous Source Current Pulsed Source Current1 Diode Forward Voltage2 Reverse Recovery Time Reverse Recovery Charge Test Conditions (Body Diode) (Body Diode) VGS = 0V , IS = – ID [Cont.] IS = – ID [Cont.] , dls / dt = 100A/µs IS = – ID [Cont.] , dls / dt = 100A/µs 700 9 Min. Typ. Max. Unit 9 A 36 1.3 V ns µC THERMAL CHARACTERISTICS RθJC RθJA Characteristic Junction to Case Junction to Ambient 1) Repetitive Rating: Pulse Width limited by maximum junction temperature. 2) Pulse Test: Pulse Width < 380µS , Duty Cycle < 2% 3) See MIL–STD–750 Method 3471 CAUTION — Electrostatic Sensitive Devices. Anti-Static Procedures Must Be Followed. Min. Typ. Max. Unit 0.62 °C/W 40 Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. Website: http://www.semelab.co.uk E-mail: sales@semelab.co.uk 6/99