SML10SIC06YFIC

DUAL SILICON CARBIDE (SiC) SCHOTTKY DIODE SML10SIC06YFIC • • • • • Hermetic Metal TO-257 Flexy-lead Isolated Package. Semelab’s Silicon Carbide (SiC) Schottky diodes exhibit low forward voltage and superb high temperature performance. Suitable for high-frequency hard switching applications, where system efficiency and reliability are paramount. No reverse recovery time due to absence of minority carrier injection. Screening Options Available. ABSOLUTE MAXIMUM RATINGS (Per Diode, TC = 25°C unless otherwise stated) VR VRRM IF IFRM IFSM PD TJ Tstg DC Reverse Voltage Repetitive Peak Reverse Voltage DC Forward Current (TJ = 175°C) Repetitive Peak Forward Current Surge Peak Forward Current Total Power Dissipation at Derate Above 25°C Junction Temperature Range Storage Temperature Range (2) (1) 600V 600V 10A 67A 250A 74W 0.37W/°C -55 to +225°C -55 to +225°C THERMAL PROPERTIES (Per Diode) Symbols RθJC Notes Notes Parameters Thermal Resistance, Junction To Case Max. 2.70 Units °C/W (1) (1) T = 25°C, T = 10ms, Half Sine Wave, D = 0.3 (2) (2) T = 25°C, T = 10µs c c p p Semelab Limited reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. S emelab Coventry Road, Lutterworth, Leicestershire, LE17 4JB Semelab Limited Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Document Number 9280 Issue 1 Page 1 of 2 Website: http://www.semelab-tt.com DUAL SILICON CARBIDE (SiC) SCHOTTKY DIODE SML10SIC06YFIC ELECTRICAL CHARACTERISTICS (Per Diode, TC = 25°C unless otherwise stated) Static Characteristics Symbols VF IR Parameters Forward Voltage Reverse Current Test Conditions IF = 10A TJ = 175°C VR = 600V TJ = 175°C Min. Typ. 1.5 2.0 10 20 Max. 1.8 2.4 50 200 Units V µA Dynamic Characteristics Qc Total Capacitive Charge VR = 600V, IF = 10A δi/δt = 500A/µs VR = 1.0V, f = 1.0MHz VR = 200V, f = 1.0MHz VR = 400V, f = 1.0MHz 25 480 50 42 pF nC C Total Capacitance MECHANICAL DATA Dimensions in mm (inches) 10.92 (0.43) 10.41 (0.41) 0.64 (0.025) 0.89 (0.035) 4.83 (0.190) 5.33 (0.210) 16.38 (0.645) 16.89 (0.665) 13.21 (0.520) 13.72 (0.540) 10.41 (0.410) 10.92 (0.430) 3.56 (0.410) 3.81 (0.150) Dia. 123 À  20 Min. 2.1 max. 1.0 dia. 3 places 2.54(0.100) BSC 0.75 (0.030) 0.85 (0.033) 3.05 (0.120) BSC 1 2 3 TO-257 Flexy-lead Pin 1 – Anode 1 ** Case Isolated S emelab Coventry Road, Lutterworth, Leicestershire, LE17 4JB Semelab Limited Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Document Number 9280 Issue 1 Page 2 of 2 Pin 2 – Common Cathode Pin 3 - Anode 2 Website: http://www.semelab-tt.com