SML6686

SML6686 MECHANICAL DATA Dimensions in mm (inches) 4 .6 5 .3 1 .4 2 .4 9 (0 1 (0 9 (0 9 (0 .1 8 .2 0 .0 5 .0 9 5) 1 5 .4 9 (0 .6 1 0 ) 1 6 .2 6 (0 .6 4 0 ) 9) 9) 8) 6 .1 5 (0 .2 4 2 ) BSC NPN MULTI-EPITAXIAL POWER TRANSISTOR FEATURES 5 .3 8 (0 .2 1 2 ) 6 .2 0 (0 .2 4 4 ) • LOW VCE(sat) • FAST SWITCHING • HIGH CURRENT • HIGH RELIABILITY 2 0 .8 0 (0 .8 1 9 ) 2 1 .4 6 (0 .8 4 5 ) 3 .5 5 (0 .1 4 0 ) 3 .8 1 (0 .1 5 0 ) 4 .5 0 (0 .1 7 7 ) MAX  ! 1 9 .8 1 (0 .7 8 0 ) 2 0 .3 2 (0 .8 0 0 ) 0 .4 0 (0 .0 1 6 ) 0 .7 9 (0 .0 3 1 ) 2 .8 7 (0 .1 1 3 ) 3 .1 2 (0 .1 2 3 ) 1 .6 5 (0 .0 6 5 ) 2 .1 3 (0 .0 8 4 ) 1 .0 1 (0 .0 4 0 ) 1 .4 0 (0 .0 5 5 ) APPLICATIONS • HIGH FREQUENCY AND EFFICIENCY CONVERTERS • SWITCHING REGULATORS 2 .2 1 (0 .0 8 7 ) 2 .5 9 (0 .1 0 2 ) 5 .2 5 (0 .2 1 5 ) BSC • MOTOR CONTROLS TO–247 PIN 1 – Base PIN 2 – Collector PIN 3 – Emitter. ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCEX VCEO VEBO IC IC(PK) IB IB(pk) Ptot TSTG TJ RqJC Collector – Emitter Voltage (VBE = -1.5V) Collector – Emitter Voltage (IB = 0) Emitter – Base Voltage Collector Current Peak Collector Current Base Current Peak Base Current Total Dissipation at Tcase = 25°C Storage Temperature Range Maximum Operating Junction Temperature Thermal Resistance (Junction – Case) 300V 160V 7V 30A 40A 8A 15A 175W –55 to 200°C 200°C 0.875°C/W Max. Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 2652 Issue 1 SML6686 ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter VCEO(sus) V(BR)EBO ICEX ICER IEBO VCE(sat)* VBE(sat)* Collector - Emitter Sustaining Voltage Test Conditions IC = 0.2A L = 25mH IE = 1mA TJ = 100°C VCE = VCEX TJ = 100°C IC = 0 IC = 25A IC = 25A VBE = –5V IB = 2.5A TJ = 100°C IB = 2.5A TJ = 100°C VCE = VCEX VBE = –1.5V RBE = 10R IB = 0 Min. 160 7 Typ. Max. Unit V V Emitter – Base Breakdown Voltage IC = 0 Collector Cut-off Current Collector Cut-off Current Emitter Cut-off Current Collector – Emitter Saturation Voltage Base – Emitter Saturation Voltage 1.0 4.0 1.0 5.0 0.5 0.5 1.2 0.9 1.5 1.5 1.4 mA V V mA * Pulse Test: tp = 300ms, d £ 2% SWITCHING CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter Switching Characteristics (Resistive Load) Test Conditions IC = 20A IB1 = IB2 = 2.5A VCC = 80V Min. Typ. Max. 0.8 2.2 0.6 Unit tr ts tf Rise Time Storage Time Fall Time ms Preliminary Datasheet Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 2652 Issue 1