SMLA42CSM

SMLA42CSM MECHANICAL DATA Dimensions in mm (inches) SILICON NPN HIGH VOLTAGE TRANSISTOR IN CERAMIC SURFACE MOUNT PACKAGE 0.31 rad. (0.012) 0.51 ± 0.10 (0.02 ± 0.004) 2.54 ± 0.13 (0.10 ± 0.005) 3 2 1 0.76 ± 0.15 (0.03 ± 0.006) 1.91 ± 0.10 (0.075 ± 0.004) 3.05 ± 0.13 (0.12 ± 0.005) A= FEATURES A 1.40 (0.055) max. 0.31 rad. (0.012) • HIGH BREAKDOWN VOLTAGE • LOW SATURATION VOLTAGES • LOW CAPACITANCE • HERMETIC CERAMIC SURFACE MOUNT PACKAGE SOT23CSM (SOT23 COMPATIBLE) 1.02 ± 0.10 (0.04 ± 0.004) SOT23 CERAMIC (LCC1 PACKAGE) Underside View PAD 1 – Base PAD 2 – Emitter PAD 3 – Collector ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO VCEO VEBO IC PD Tj Tstg Collector – Base Voltage Collector – Emitter Voltage Emitter – Base Voltage Collector Current Total Device Dissipation Derate Above 25°C Maximum Junction Temperature Storage Temperature Range 300V 300V 6V 500mA 350mW 2.0mW/°C 200°C –55 to 200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5668 Issue: 2 SMLA42CSM ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter V(BR)CBO V(BR)CEO V(BR)EBO ICBO IEBO VCE(sat) VBE(sat) Collector - Base breakdown voltage Collector - Emitter breakdown voltage Emitter - Base breakdown voltage Collector cut-off current Emitter cut-off current Collector - Emitter saturation voltage Base - Emitter saturation voltage DC Current gain Test Conditions IC = 100µA IC = 1mA IE = 100µA VCB = 200V VEB = 6V IC = 20mA IC = 20mA IC = 1mA IE = 0 IB = 0* IC = 0 IE = 0 IC = 0 IB = 2mA IB = 2mA VCE = 10V* VCE = 10V* VCE = 10V* VCE = 20V f = 20MHz VCB = 20V IE = 0 f = 1MHz Min. 300 300 6 Typ. Max. Unit V V V 0.1 0.1 0.5 0.9 25 40 40 50 6 µA µA V V hFE IC = 10mA IC = 30mA IC = 10mA — fT Cob Transition frequency Output capacitance MHz pF * Pulse test tp = 200µs , δ = 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5668 Issue: 2