SMP400G-X3

SMP400G-X3 MECHANICAL DATA Dimensions in inches. 0.175 0.205 P.I.N. PHOTODIODE 0.170 0.210 FEATURES • • • • RED PLASTIC ENCAPSULATED PACKAGE 0.1” (2.54mm) LEAD SPACING BUILT IN FILTER LOW DARK CURRENT 0.500 Min. 0.015 0.018 DESCRIPTION The SMP400G-X3 is a silicon PIN photodiode which is incorporated in a red plastic package which simultaneously serves as a filter and is also transparent for the red to infra-red emission.The terminals are solder tabs with 0.1” (2.54mm) spacing. Due to its design the diode can be assembled vertically on PC board. Arrays can be realised by multiple arrangements.This versatile photo detector can be used as a diode as well as a voltage cell. The signal / noise ratio is particularly favourable , even at low illuminances. The PIN photodiode is outstanding for low junction capacitance , high cut off frequency and short switching time. It is particularly suitable for IR sound transmission and remote control. 0.095 0.105 Active Area 0.015 0.018 0.125 0.165 ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) Operating temperature range Storage temperature range Temperature coefficient of responsively Temperature coefficient of dark current Reverse Breakdown Voltage Semelab plc. Telephone (01455) 556565. Telex: 341927. Fax (01455) 552612. 0.080 0.105 TO-92 Package -40°C to +70°C -45°C to +80°C 0.35% per °C x2 per 8°C rise 60V Prelim. 1/98 SMP400G-X3 CHARACTERISTICS (Tamb=25°C unless otherwise stated) Characteristic Test Conditions. Responsively Active Area Dark Current Breakdown Voltage Capacitance E = 0 Dark E = 0 Dark E = 0 Dark E = 0 Dark E = 0 Dark 30V Reverse 50Ω 900nm Directional characteristics Min. 0.45 Typ. 0.55 0.62 Max. Units A/W mm2 λ at 900nm 1V Reverse 10V Reverse 10µA Reverse 0V Reverse 20V Reverse 60 0.1 0.5 80 8 1.5 4 7.2 1.0 2.5 nA V 12 2.5 pF Rise Time NEP ns W/√Hz Directional Characteristics 1 80° 70° Angle from sensor to illumination 1 0.9 0.8 Normalised incident power 60° 0.8 50° 0.6 0.7 0.6 0.5 0.4 0.3 0.2 40° 30° 0.4 20° 0.2 10° 0.1 0 0 0 0.2 0.4 0.6 0.8 1 Normalised incident power 0 10 20 30 40 50 60 70 80 90 Angle from sensor to illumination Spectral Response 100 Relative Responsivity (%) 80 60 40 20 0 0 200 400 600 Wavelength (nm) 800 1000 1200 Semelab plc. Telephone (01455) 556565. Telex: 341927. Fax (01455) 552612. Prelim. 1/98