0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
SMP550G-X1

SMP550G-X1

  • 厂商:

    SEME-LAB

  • 封装:

  • 描述:

    SMP550G-X1 - P.I.N. PHOTODIODE - Seme LAB

  • 详情介绍
  • 数据手册
  • 价格&库存
SMP550G-X1 数据手册
SMP550G-X1 MECHANICAL DATA Dimensions in inches 0.175 0.205 P.I.N. PHOTODIODE 0.170 0.210 FEATURES • • • • • WATER CLEAR PLASTIC WIDE SPECTRAL RESPONSE 0.1” (2.54mm) LEAD SPACING LOW DARK CURRENT HIGH SENSITIVITY 0.500 Min. 0.015 0.018 DESCRIPTION 0.095 0.105 Active Area The SMP550G-X1 is a silicon PIN photodiode which is incorporated in a colourless plastic package. The terminals are solder tabs with 0.1” (2.54mm) spacing. Due to its design the diode can be assembled vertically on PC board. Arrays can be realised by multiple arrangements. This versatile photo detector can be used as a diode as well as a voltage cell. 0.125 0.165 0.015 0.018 The signal / noise ratio is particularly favourable , even at low illuminances. The PIN photodiode is outstanding for low junction capacitance , high cut off frequency and short switching time. It is particularly suitable for IR sound transmission and remote control. ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) Operating temperature range Storage temperature range Temperature coefficient of responsively Temperature coefficient of dark current Reverse Breakdown Voltage Semelab plc. Telephone (01455) 556565. Telex: 341927. Fax (01455) 552612. 0.080 0.105 TO-92 Package -40°C to +70°C -45°C to +80°C 0.35% per °C x2 per 8°C rise 60V Prelim. 1/98 SMP550G-X1 CHARACTERISTICS (Tamb=25°C unless otherwise stated) Characteristic Test Conditions. Responsively Active Area Dark Current Breakdown Voltage Capacitance E = 0 Dark E = 0 Dark E = 0 Dark E = 0 Dark E = 0 Dark 30V Reverse 50Ω 900nm Direc tional characteristics 80° 70° 1 0.9 0.8 Min. 0.45 Typ. 0.55 5.19 Max. Units A/W mm2 λ at 900nm 1V Reverse 10V Reverse 10µA Reverse 0V Reverse 20V Reverse 60 0.25 1 80 30 5 8 9.8 Direc tional Characteristics 2 5 nA V 55 10 pF Rise Time NEP ns W/√Hz 1 Angle from sensor to illumination 60° 0.8 50° 0.6 Normalised incident power 0.7 0.6 0.5 0.4 0.3 0.2 40° 30° 0.4 20° 0.2 10° 0.1 0 0 0 0.2 0.4 0.6 0.8 1 Normalised incident power 0 10 20 30 40 50 60 70 80 90 Angle from sensor to illumination Spectral Response 10 0 Relative Responsivity (%) 80 60 40 20 0 0 20 0 40 0 60 0 Wavelength (nm) 80 0 100 0 120 0 Semelab plc. Telephone (01455) 556565. Telex: 341927. Fax (01455) 552612. Prelim. 1/98
SMP550G-X1
物料型号: - 型号为SMP550G-X1。

器件简介: - SMP550G-X1是一款硅PIN光电二极管,采用无色塑料封装。该二极管能够在垂直于PCB板上组装,并且可以通过多个排列实现阵列。这款多功能光电探测器既可以作为二极管使用,也可以作为电压电池使用。

引脚分配: - 引脚为焊片,间距为0.1英寸(2.54mm)。

参数特性: - 响应性:在900nm波长下,响应性为0.45至0.55A/W。 - 暗电流:在1V反向电压下,典型值为0.25至2nA;在10V反向电压下,典型值为1至5nA。 - 反向击穿电压:在10A反向电流下,最小值为60V,最大值为80V。 - 电容:在0V反向电压下,典型值为30至55pF;在20V反向电压下,典型值为5至10pF。 - 上升时间:在30V反向电压下,上升时间为8ns。 - 噪声等效功率(NEP):在900nm波长下,为9.8W/Hz。

功能详解: - 该PIN光电二极管具有较低的结电容、高截止频率和短开关时间,特别适合用于红外声音传输和遥控。 - 信噪比在低照度下也特别有利。

应用信息: - 由于其低暗电流和高灵敏度,SMP550G-X1适用于光信号检测和光电转换应用,尤其是在红外遥控和声音传输领域。

封装信息: - 封装类型为TO-92。
SMP550G-X1 价格&库存

很抱歉,暂时无法提供与“SMP550G-X1”相匹配的价格&库存,您可以联系我们找货

免费人工找货