2N2369AUB

2N2369AUB Silicon NPN Transistor Data Sheet Description Semicoa Semiconductors offers: • Screening and processing per MIL-PRF-19500 Appendix E • JAN level (2N2369AUBJ) • JANTX level (2N2369AUBJX) • JANTXV level (2N2369AUBJV) • JANS level (2N2369AUBJS) • QCI to the applicable level • 100% die visual inspection per MIL-STD-750 method 2072 for JANTXV and JANS • Radiation testing (total dose) upon request Applications • High-speed switching transistor • Low power • NPN silicon transistor Features • • • • Hermetically sealed Cersot ceramic Also available in chip configuration Chip geometry 0005 Reference document: MIL-PRF-19500/317 Benefits Please contact Semicoa for special configurations www.SEMICOA.com or (714) 979-1900 • Qualification Levels: JAN, JANTX, JANTXV and JANS • Radiation testing available TC = 25°C unless otherwise specified Absolute Maximum Ratings Parameter Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Power Dissipation, TA = 25°C Derate linearly above 70°C Thermal Resistance Operating Junction Temperature Storage Temperature Symbol VCEO VCBO VEBO PT Rating 15 40 4.5 0.4 3.08 325 -65 to +200 -65 to +200 Unit Volts Volts Volts mW mW/°C °C/W °C °C RθJA TJ TSTG Copyright 2002 Rev. J Semicoa Semiconductors, Inc. 333 McCormick Avenue, Costa Mesa, California 92626 714.979.1900, FAX 714.557.4541 Page 1 of 1 www.SEMICOA.com 2N2369AUB Silicon NPN Transistor Data Sheet ELECTRICAL CHARACTERISTICS characteristics specified at TA = 25°C Off Characteristics Parameter Collector-Emitter Breakdown Voltage Collector-Base Cutoff Current Collector-Emitter Cutoff Current Collector-Emitter Cutoff Current Emitter-Base Cutoff Current On Characteristics Parameter Symbol hFE1 hFE2 hFE3 hFE4 hFE5 VBEsat1 VBEsat2 VBEsat3 VBEsat4 VBEsat5 VCEsat1 VCEsat2 VCEsat3 VCEsat4 Symbol |hFE| COBO CIBO Symbol V(BR)CEO ICBO1 ICBO2 ICBO3 ICEX ICES IEBO1 IEBO2 Test Conditions IC = 10 mA VCB = 40 Volts VCB = 32 Volts VCB = 20 Volts, TA = 150°C VCE= 10Volts, VEB= 0.25Volts TA = 125°C VCE = 20 Volts VEB = 4.5 Volts VEB = 4 Volts Test Conditions IC = 10 mA, VCE = 0.35 Volts IC = 30 mA, VCE = 0.4 Volts IC = 10 mA, VCE = 1 Volts IC = 100 mA, VCE = 1 Volts IC = 10 mA, VCE = 1 Volts TA = -55°C IC = 10 mA, IB = 1 mA IC = 30 mA, IB = 3 mA IC = 100 mA, IB = 10 mA IC= 10mA, IB= 1mA,TA=+125°C IC= 10mA, IB= 1mA, TA = -55°C IC = 10 mA, IB = 1 mA IC = 30 mA, IB = 3 mA IC = 100 mA, IB = 10 mA IC= 10mA, IB= 1mA,TA=+125°C Test Conditions VCE = 10 Volts, IC = 10 mA, f = 100 MHz VCB = 5 Volts, IE = 0 mA, 100 kHZ < f < 1 MHz VEB = 0.5 Volts, IC = 0 mA, 100 kHZ < f < 1 MHz IC = 10 mA, IB1=IB2 = 10 mA IC = 10 mA, IB1= 3 mA, IB2 = 1.5 mA IC = 10 mA, IB1= 3 mA, IB2 = 1.5 mA Min 15 10 0.2 30 30 400 10 0.25 Min 40 30 40 20 20 0.70 0.80 0.59 Typ Max 120 120 120 120 0.85 0.90 1.20 1.02 0.20 0.25 0.45 0.30 Min 5 Typ Max 10 4 5 pF pF Typ Max Units Volts µA µA nA µA Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤ 2.0% Units DC Current Gain Base-Emitter Saturation Voltage Volts Collector-Emitter Saturation Voltage Dynamic Characteristics Parameter Magnitude – Common Emitter, Short Circuit Forward Current Transfer Ratio Open Circuit Output Capacitance Open Circuit Input Capacitance Switching Characteristics Storage Time Saturated Turn-On Time Saturated Turn-Off Time Volts Units ts tON tOFF 13 12 18 ns ns ns Copyright 2002 Rev. J Semicoa Semiconductors, Inc. 333 McCormick Avenue, Costa Mesa, California 92626 714.979.1900, FAX 714.557.4541 Page 2 of 2 www.SEMICOA.com