2N2905AL

Data Sheet No. 2N2905AL Type 2N2905AL Geometry 0600 Polarity PNP Qual Level: JAN - JANS Features: • • • • • • General-purpose transistor for switching and amplifier applicatons. Housed in a TO-5 case. Also available in chip form using the 0600 chip geometry. The Min and Max limits shown are per MIL-PRF-19500/290 which Semicoa meets in all cases. The Typ values are actual batch averages for Semicoa. Radiation Graphs available. Generic Part Number: 2N2905A REF: MIL-PRF-19500/290 TO-5 Maximum Ratings TC = 25oC unless otherwise specified Rating Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current, Continuous Operating Junction Temperature Storage Temperature Symbol VCEO VCBO VEBO IC TJ TSTG Rating 60 60 5.0 600 -65 to +200 -65 to +200 Unit V V V mA o C C o Data Sheet No. 2N2905AL Electrical Characteristics TC = 25oC unless otherwise specified OFF Characteristics Collector-Base Breakdown Voltage IC = 10 µA Collector-Emitter Breakdown Voltage IC = 10 mA Emitter-Base Breakdown Voltage IE = 10 µA Collector-Emitter Cutoff Current VCE = 30 V Collector-Base Cutoff Current VCB = 50 V Emitter-Base Cutoff Current VEB = 3.5 V Symbol V(BR)CBO V(BR)CEO V(BR)EBO ICES ICBO IEBO Min 60 60 5.0 ------- Typ 100 70 9.0 1.0 0.25 0.1 Max ------50 10 50 Unit V V V nA nA nA ON Characteristics DC Current Gain IC = 100 µA, VCE = 10 V IC = 1.0 mA, VCE = 10 V IC = 10 mA, VCE = 10 V IC = 150 mA, VCE = 10 V (pulse test) IC = 500 mA, VCE = 10 V (pulse test) Collector-Emitter Saturation Voltage IC = 150 mA, IB = 15 mA (pulse test) IC = 500 mA, IB = 50 mA (pulse test) Base-Emitter Saturation Voltage IC = 150 mA, IB = 15 mA (pulse test) IC = 500 mA, IB = 50 mA (pulse test) Symbol hFE1 hFE2 hFE3 hFE4 hFE5 VCE(sat)1 VCE(sat)2 VBE(sat)1 VBE(sat)2 Min 75 100 100 100 50 --------- Typ 225 250 --180 80 0.18 0.5 0.87 1.0 Max --450 --300 --0.4 1.6 1.3 2.6 Unit ----------V dc V dc V dc V dc Small Signal Characteristics Short Circuit Forward Current Transfer Ratio IC = 1 mA, VCE = 10 V, f = 1kHz Open Circuit Output Capacitance VCB = 10 V, IE = 0 V, 100 kHz < f < 1 MHz Input Capacitance, Output Open Circuited VEB = 2.0 V, IC = 0, 100 kHz < f < 1 MHz Symbol AC hFE COBO CIBO Min 100 ----- Typ 250 6.0 8.0 Max --8.0 30 Unit --pF pF Switching Characteristics Saturated Turn On Switching Time to 90% 16V, 50 ohm input pulse Saturated Turn Off Switching Time to 10% 16V, 50 ohm input pulse Symbol tON tOFF Min ----- Typ 25 200 Max 45 300 Unit ns ns