2N6987_02

2N6987 Silicon PNP Transistor Data Sheet Description Complement to the 2N6989 Semicoa Semiconductors offers: • Screening and processing per MIL-PRF-19500 Appendix E • JAN level (2N6987J) • JANTX level (2N6987JX) • JANTXV level (2N6987JV) • JANS level (2N6987JS) • QCI to the applicable level • 100% die visual inspection per MIL-STD-750 method 2072 for JANTXV and JANS • Radiation testing (total dose) upon request Applications • General purpose switching • 4 Transistor Array • PNP silicon transistor Features • • • • Hermetically sealed Cerdip ceramic Also available in chip configuration Chip geometry 0600 Reference document: MIL-PRF-19500/558 Benefits Please contact Semicoa for special configurations www.SEMICOA.com or (714) 979-1900 • Qualification Levels: JAN, JANTX, JANTXV and JANS • Radiation testing available Absolute Maximum Ratings Parameter Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current, Continuous Power Dissipation, TA = 25 C Derate linearly above 25OC Operating Junction Temperature Storage Temperature O TC = 25°C unless otherwise specified Symbol VCEO VCBO VEBO IC PT TJ TSTG Rating 60 60 5 600 1.5 8.57 -65 to +200 -65 to +200 Unit Volts Volts Volts mA W mW/°C °C °C Copyright 2002 Rev. D Semicoa Semiconductors, Inc. 333 McCormick Avenue, Costa Mesa, California 92626 714.979.1900, FAX 714.557.4541 Page 1 of 2 www.SEMICOA.com 2N6987 Silicon PNP Transistor Data Sheet ELECTRICAL CHARACTERISTICS characteristics specified at TA = 25°C Off Characteristics Parameter Collector-Emitter Breakdown Voltage Collector-Base Cutoff Current Collector-Base Cutoff Current Emitter-Base Cutoff Current On Characteristics Parameter Symbol hFE1 hFE2 hFE3 hFE4 hFE5 hFE6 VBEsat1 VBEsat2 VCEsat1 VCEsat2 Test Conditions IC = 0.1 mA, VCE = 10 Volts IC = 1.0 mA, VCE = 10 Volts IC = 10 mA, VCE = 10 Volts IC = 150 mA, VCE = 10 Volts IC = 500 mA, VCE = 10 Volts IC = 1.0 mA, VCE = 10 Volts TA = -55°C IC = 150 mA, IB = 15 mA IC = 500 mA, IB = 50 mA IC = 150 mA, IB = 15 mA IC = 500 mA, IB = 50 mA Symbol V(BR)CEO ICBO1 ICBO2 ICBO3 IEBO1 IEBO2 Test Conditions IC = 10 mA VCB = 60 Volts VCB = 50 Volts VCB = 50 Volts, TA = 150°C VEB = 5 Volts VEB = 4 Volts Min 60 10 10 10 10 50 Typ Max Units Volts µA nA µA µA nA Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤ 2.0% DC Current Gain Min 75 100 100 100 50 50 Typ Max 450 300 Units Base-Emitter Saturation Voltage Collector-Emitter Saturation Voltage Dynamic Characteristics Parameter Magnitude – Common Emitter, Short Circuit Forward Current Transfer Ratio Small Signal Short Circuit Forward Current Transfer Ratio Open Circuit Output Capacitance Open Circuit Input Capacitance Transistor to Transistor Resistance Switching Characteristics Saturated Turn-On Time Saturated Turn-Off Time 1.3 2.6 0.4 1.6 Volts Volts Symbol |hFE| hFE COBO CIBO |RT-T| tON tOFF Test Conditions VCE = 20 Volts, IC = 20 mA, f = 100 MHz VCE = 10 Volts, IC = 1 mA, f = 1 kHz VCB = 10 Volts, IE = 0 mA, 100 kHZ < f < 1 MHz VEB = 2 Volts, IC = 0 mA, 100 kHZ < f < 1 MHz |VT-T| = 500 Volts Min 2 100 Typ Max Units 8 30 1010 pF pF Ω 45 300 ns ns Copyright 2002 Rev. D Semicoa Semiconductors, Inc. 333 McCormick Avenue, Costa Mesa, California 92626 714.979.1900, FAX 714.557.4541 Page 2 of 2 www.SEMICOA.com