SEMIX101GD126HDS_10

SEMiX101GD126HDs Absolute Maximum Ratings Symbol IGBT VCES IC ICnom ICRM ICRM = 2xICnom VCC = 600 V VGE ≤ 20 V VCES ≤ 1200 V VGES tpsc Tj Inverse diode IF Tc = 25 °C Tc = 80 °C Tj = 125 °C Tj = 150 °C Tc = 25 °C Tc = 80 °C 1200 129 91 75 150 -20 ... 20 10 -40 ... 150 117 81 75 IFRM = 2xIFnom tp = 10 ms, sin 180°, Tj = 25 °C 150 600 -40 ... 150 600 -40 ... 125 AC sinus 50Hz, t = 1 min 4000 V A A A A V µs °C A A A A A °C A °C V Conditions Values Unit SEMiX® 13 Trench IGBT Modules SEMiX101GD126HDs Tj = 150 °C IFnom Features • Homogeneous Si • Trench = Trenchgate technology • VCE(sat) with positive temperature coefficient • High short circuit capability • UL recognised file no. E63532 IFRM IFSM Tj Module It(RMS) Tstg Visol Typical Applications* • AC inverter drives • UPS • Electronic Welding Characteristics Symbol IGBT VCE(sat) VCE0 rCE VGE(th) ICES Cies Coes Cres QG RGint td(on) tr Eon td(off) tf Eoff Rth(j-c) per IGBT IC = 75 A VGE = 15 V chiplevel Tj = 25 °C Tj = 125 °C Tj = 25 °C Tj = 125 °C VGE = 15 V VGE=VCE, IC = 3 mA VGE = 0 V VCE = 1200 V VCE = 25 V VGE = 0 V VGE = - 8 V...+ 15 V Tj = 25 °C VCC = 600 V IC = 75 A RG on = 2 Ω RG off = 2 Ω Tj = 125 °C Tj = 125 °C Tj = 125 °C Tj = 125 °C Tj = 125 °C Tj = 125 °C Tj = 25 °C Tj = 125 °C f = 1 MHz f = 1 MHz f = 1 MHz 5.3 0.28 0.24 600 10.00 225 40 10 470 85 11 0.27 Tj = 25 °C Tj = 125 °C 5 1.7 2 1 0.9 9.3 14.7 5.8 0.1 2.1 2.45 1.2 1.1 12.0 18.0 6.5 0.3 V V V V mΩ mΩ V mA mA nF nF nF nC Ω ns ns mJ ns ns mJ K/W Conditions min. typ. max. Unit Remarks • Case temperatur limited to TC=125°C max. • Not for new design GD © by SEMIKRON Rev. 0 – 16.04.2010 1 SEMiX101GD126HDs Characteristics Symbol Conditions Tj = 25 °C Tj = 125 °C Tj = 25 °C Tj = 125 °C rF Tj = 25 °C Tj = 125 °C IF = 75 A Tj = 125 °C di/dtoff = 2240 A/µs T = 125 °C j VGE = -15 V Tj = 125 °C VCC = 600 V per diode 0.9 0.7 6.7 9.3 min. typ. 1.6 1.6 1 0.8 8.0 10.7 97 20 9 max. 1.80 1.8 1.1 0.9 9.3 12.0 Unit V V V V mΩ mΩ A µC mJ Inverse diode VF = VEC IF = 75 A VGE = 0 V chip VF0 SEMiX® 13 Trench IGBT Modules SEMiX101GD126HDs IRRM Qrr Err Rth(j-c) Module LCE RCC'+EE' 0.46 20 K/W nH mΩ mΩ K/W res., terminal-chip per module to heat sink (M5) TC = 25 °C TC = 125 °C 3 to terminals (M6) 2.5 0.7 1 0.04 5 5 350 Features • Homogeneous Si • Trench = Trenchgate technology • VCE(sat) with positive temperature coefficient • High short circuit capability • UL recognised file no. E63532 Rth(c-s) Ms Mt w Nm Nm Nm g Ω K Typical Applications* • AC inverter drives • UPS • Electronic Welding Temperatur Sensor R100 B100/125 Tc=100°C (R25=5 kΩ) R(T)=R100exp[B100/125(1/T-1/T100)]; T[K]; 493 ± 5% 3550 ±2% Remarks • Case temperatur limited to TC=125°C max. • Not for new design GD 2 Rev. 0 – 16.04.2010 © by SEMIKRON SEMiX101GD126HDs Fig. 1: Typ. output characteristic, inclusive RCC'+ EE' Fig. 2: Rated current vs. temperature IC = f (TC) Fig. 3: Typ. turn-on /-off energy = f (IC) Fig. 4: Typ. turn-on /-off energy = f (RG) Fig. 5: Typ. transfer characteristic Fig. 6: Typ. gate charge characteristic © by SEMIKRON Rev. 0 – 16.04.2010 3 SEMiX101GD126HDs Fig. 7: Typ. switching times vs. IC Fig. 8: Typ. switching times vs. gate resistor RG Fig. 9: Typ. transient thermal impedance Fig. 10: Typ. CAL diode forward charact., incl. RCC'+EE' Fig. 11: Typ. CAL diode peak reverse recovery current Fig. 12: Typ. CAL diode recovery charge 4 Rev. 0 – 16.04.2010 © by SEMIKRON SEMiX101GD126HDs SEMiX 13 spring configuration This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, Chapter IX * The specifications of our components may not be considered as an assurance of component characteristics. Components have to be tested for the respective application. Adjustments may be necessary. The use of SEMIKRON products in life support appliances and systems is subject to prior specification and written approval by SEMIKRON. We therefore strongly recommend prior consultation of our personal. © by SEMIKRON Rev. 0 – 16.04.2010 5