SEMIX151GD128DS_08

SEMiX151GD128Ds Absolute Maximum Ratings Symbol IGBT VCES IC ICnom ICRM ICRM = 2xICnom VCC = 600 V VGE ≤ 20 V Tj = 125 °C VCES ≤ 1200 V VGES tpsc Tj = 150 °C Tc = 25 °C Tc = 80 °C 1200 154 110 75 150 -20 ... 20 10 -40 ... 150 Tc = 25 °C Tc = 80 °C 119 82 75 IFRM = 2xIFnom tp = 10 ms, sin 180°, Tj = 25 °C 150 720 -40 ... 150 600 -40 ... 125 AC sinus 50Hz, t = 1 min 4000 V A A A A V µs °C A A A A A °C A °C V Conditions Values Unit SEMiX®13 SPT IGBT Modules SEMiX151GD128Ds Tj Inverse diode IF IFnom IFRM IFSM Tj Module It(RMS) Tstg Visol Preliminary Data Features • Homogeneous Si • SPT = Soft-Punch-Through technology • VCE(sat) with positive temperature coefficient • High short circuit capability • UL recognised file no. E63532 Tj = 150 °C Typical Applications • AC inverter drives • UPS • Electronic welders up to 20 kHz Characteristics Symbol IGBT VCE(sat) VCE0 rCE VGE(th) ICES Cies Coes Cres QG RGint td(on) tr Eon td(off) tf Eoff Rth(j-c) Rth(j-s) per IGBT per IGBT IC = 75 A VGE = 15 V chiplevel Tj = 25 °C Tj = 125 °C Tj = 25 °C Tj = 125 °C VGE = 15 V VGE=VCE, IC = 3 mA VGE = 0 V VCE = 1200 V VCE = 25 V VGE = 0 V VGE = - 8 V...+ 15 V Tj = 25 °C VCC = 600 V IC = 75 A Tj = 125 °C RG on = 5.5 Ω RG off = 5.5 Ω Tj = 25 °C Tj = 125 °C f = 1 MHz f = 1 MHz f = 1 MHz 6.9 0.46 0.29 710 5.00 200 33 7.9 330 44 7.9 0.19 Tj = 25 °C Tj = 125 °C 4.5 1.9 2.10 1 0.9 12.0 16.0 5 0.1 2.3 2.55 1.15 1.05 15.3 20.0 6.5 0.3 V V V V mΩ mΩ V mA mA nF nF nF nC Ω ns ns mJ ns ns mJ K/W K/W Conditions min. typ. max. Unit GD © by SEMIKRON Rev. 9 – 02.12.2008 1 SEMiX151GD128Ds Characteristics Symbol Conditions Tj = 25 °C Tj = 125 °C Tj = 25 °C Tj = 125 °C Tj = 25 °C Tj = 125 °C IF = 75 A Tj = 125 °C di/dtoff = 2500 A/µs T = 125 °C j VGE = -15 V Tj = 125 °C VCC = 600 V per diode per diode 20 res., terminal-chip per module to heat sink (M5) to terminals (M6) 3 2.5 TC = 25 °C TC = 125 °C 0.7 1 0.04 5 5 350 0,493 ±5% 3550 ±2% 0.75 0.5 10.0 10.7 min. typ. 2.0 1.8 1.1 0.85 12.0 12.7 90 11 3.5 max. 2.5 2.3 1.45 1.2 14.0 14.7 Unit V V V V mΩ mΩ A µC mJ Inverse diode VF = VEC IF = 75 A VGE = 0 V chiplevel VF0 rF IRRM SEMiX®13 SPT IGBT Modules SEMiX151GD128Ds Qrr Err Rth(j-c) Rth(j-s) Module LCE RCC'+EE' Rth(c-s) Ms Mt w 0.36 K/W K/W nH mΩ mΩ K/W Nm Nm Nm g Preliminary Data Features • Homogeneous Si • SPT = Soft-Punch-Through technology • VCE(sat) with positive temperature coefficient • High short circuit capability • UL recognised file no. E63532 Typical Applications • AC inverter drives • UPS • Electronic welders up to 20 kHz Temperature sensor R100 B100/125 Tc=100°C (R25=5 kΩ) R(T)=R100exp[B100/125(1/T-1/T100)]; T[K]; kΩ K GD 2 Rev. 9 – 02.12.2008 © by SEMIKRON SEMiX151GD128Ds Fig. 1 Typ. output characteristic, inclusive RCC'+ EE' Fig. 2 Rated current vs. temperature IC = f (TC) Fig. 3 Typ. turn-on /-off energy = f (IC) Fig. 4 Typ. turn-on /-off energy = f (RG) Fig. 5 Typ. transfer characteristic Fig. 6 Typ. gate charge characteristic © by SEMIKRON Rev. 9 – 02.12.2008 3 SEMiX151GD128Ds Fig. 7 Typ. switching times vs. IC Fig. 8 Typ. switching times vs. gate resistor RG Fig. 9 Typ. transient thermal impedance Fig. 10 Typ. CAL diode forward charact., incl. RCC'+EE' Fig. 11 Typ. CAL diode peak reverse recovery current Fig. 12 Typ. CAL diode recovery charge 4 Rev. 9 – 02.12.2008 © by SEMIKRON SEMiX151GD128Ds SEMiX 13 GD This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, Chapter IX This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee expressed or implied is made regarding delivery, performance or suitability. © by SEMIKRON Rev. 9 – 02.12.2008 5