SEMIX854GB176HDS_08

SEMiX854GB176HDs Absolute Maximum Ratings Symbol IGBT VCES IC ICRM VGES Tj = 150°C ICRM = 2xICnom VCC = 1000V VGE ≤ 20V Tj = 125°C VCES ≤ 1700V Tc = 25°C Tc = 80°C 1700 779 549 1200 -20 ... 20 10 -55 ... 150 Tc = 25°C Tc = 80°C 740 496 1200 3800 -40 ... 150 600 -40 ... 125 AC sinus 50Hz, t = 60s 4000 V A A A V µs °C A A A A °C A °C V Conditions Values Unit SEMiX®4s Trench IGBT Modules tpsc Tj Inverse diode IF Tj = 150°C IFRM = 2xIFnom tp = 10ms, half sine wave, Tj = 25°C SEMiX854GB176HDs Preliminary Data Features • Homogeneous Si • Trench = Trenchgate technology • VCE(sat) with positive temperature coefficient • UL recognised file no. E63532 IFRM IFSM Tj Module It(RMS) Tstg Visol Typical Applications • AC inverter drives • UPS • Electronic welders Characteristics Symbol IGBT VCE(sat) VCE0 rCE VGE(th) ICES Cies Coes Cres QG RGint td(on) tr Eon td(off) tf Eoff Rth(j-c) per IGBT ICnom = 600A VGE = 15V chiplevel Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C VGE = 15V Tj = 25°C Tj = 125°C 5.2 Tj = 25°C Tj = 125°C f = 1MHz f = 1MHz f = 1MHz 52.8 2.20 1.75 5600 1.25 340 80 395 890 155 235 0.045 2 2.45 1 0.9 1.7 2.6 5.8 0.12 2.45 2.9 1.2 1.1 2.1 3.0 6.4 0.36 V V V V mΩ mΩ V mA mA nF nF nF nC Ω ns ns mJ ns ns mJ K/W Conditions min. typ. max. Unit Remarks VGE=VCE, IC = 24mA VGE = 0V VCE = 1700V VCE = 25V VGE = 0V VGE = - 8 V...+ 15 V Tj = 25°C VCC = 1200V ICnom = 600A Tj = 125°C RG on = 2Ω RG off = 2Ω GB © by SEMIKRON 03.04.2008 1 SEMiX854GB176HDs Characteristics Symbol Conditions Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C rF Tj = 25°C Tj = 125°C IFnom = 600A Tj = 125°C di/dtoff = 8000A/µs T = 125°C j VGE = -15V Tj = 125°C VCC = 1200V per diode 0.9 0.7 1.0 1.3 min. typ. 1.7 1.7 1.1 0.9 1.0 1.3 730 220 170 max. 1.9 1.9 1.3 1.1 1.0 1.3 Unit V V V V mΩ mΩ A µC mJ Inverse diode VF = VEC IFnom = 600A VGE = 0V chiplevel VF0 SEMiX®4s Trench IGBT Modules IRRM Qrr Err Rth(j-c)D Module 0.081 22 K/W nH mΩ mΩ K/W SEMiX854GB176HDs Preliminary Data Features • Homogeneous Si • Trench = Trenchgate technology • VCE(sat) with positive temperature coefficient • UL recognised file no. E63532 LCE RCC'+EE' Rth(c-s) Ms Mt w Temperature sensor R100 B100/125 Tc=100°C (R25=5 kΩ) R(T)=R100exp[B100/125(1/T-1/T100)]; T[K]; res., terminal-chip per module to heat sink (M5) to terminals (M6) 3 2.5 TC = 25°C TC = 125°C 0.7 1 0.03 5 5 400 0,493 ±5% 3550 ±2% Nm Nm g Typical Applications • AC inverter drives • UPS • Electronic welders kΩ K Remarks GB 2 03.04.2008 © by SEMIKRON SEMiX854GB176HDs Fig. 1 Typ. output characteristic, inclusive RCC'+ EE' Fig. 2 Rated current vs. temperature IC = f (TC) Fig. 3 Typ. turn-on /-off energy = f (IC) Fig. 4 Typ. turn-on /-off energy = f (RG) Fig. 5 Typ. transfer characteristic Fig. 6 Typ. gate charge characteristic © by SEMIKRON 03.04.2008 3 SEMiX854GB176HDs Fig. 7 Typ. switching times vs. IC Fig. 8 Typ. switching times vs. gate resistor RG Fig. 9 Typ. transient thermal impedance Fig. 10 Typ. CAL diode forward charact., incl. RCC'+EE' Fig. 11 Typ. CAL diode peak reverse recovery current Fig. 12 Typ. CAL diode recovery charge 4 03.04.2008 © by SEMIKRON SEMiX854GB176HDs SEMiX 4s GB This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, Chapter IX This technical information specifies semiconductor devices but promises no characteristics. No warranty or gurantee expressed or implied is made regarding delivery, performance or suitability. © by SEMIKRON 03.04.2008 5