SMTA5-700-60

SMTA5-700 Phase Control Thyristor Type SMTA5-700-50 SMTA5-700-52 SMTA5-700-55 SMTA5-700-60 SMTA5-700-65 VRSM 5100 5300 5600 6100 6600 VRRM , VDRM 5000 5200 5500 6000 6500 Symbol ITAVM ITRMS ITSM i2t Parameter average on-state current maximum RMS on-state current surge-current Test Conditions TC=100OC TVJ=TVJM TC=25OC; tP=10ms TVJ=TVJM; tP=10ms TC=25OC; tP=10ms TVJ=TVJM; tP=10ms Value 700 1650 10 11 500 605 Unit A A kA kA2·s i2t-value (di/dt)cr critical rate of rise of on-state current critical rate of rise of off-state volvage off-state Leakage current reverse repeat Peak value voltage off state repeat Peak value voltage non-repetitive peak reverse voltage on-state voltage slope resistance gate trigger voltage gate trigger current gate non-trigger voltage gate non-trigger current holding current latching current TVJ=TVJM; VD=0.67·VDRM ; f=50 Hz; iGM=3A; diG/dt=6A/µs TVJ=TVJM; VD=0.67·VDRM ; gate open TVJ=TVJM; VR=VRRM; VD=VDRM TVJ=TVJM; 180OC sine wave, 50 Hz; gate open 250 A/µs (dv/dt)cr IRRM/IDRM VRRM VDRM VRSM VTM rT VGT IGT VGD IGD IH IL 1000 200 5000-6500 5000-6500 5100-6600 2.19 0.97 2.5 250 0.4 10 350 V/µs mA V V V V mW V mA V mA mA TVJ=TVJM TVJ=TVJM; ITM=1000A TVJ=TVJM TVJ=25OC; VD=12V TVJ=25OC; VD=12V TVJ=TVJM; VD=0.67·VDRM TVJ=TVJM; VD=0.67·VDRM TVJ=25OC; VD=12V; gate open TVJ=25 C; VD=12V; tG=20µs; iGM=3A; diG/dt=6A/µs O 400 mA SEMPO Electronic Limited www.sempoel.com tgd delay time turn-off time TVJ=25OC; VD=0.5·VDRM; iGM=3A; diG/dt=6A/µs TVJ=TVJM; IT=ITAVM; tP=200µs; diR/dt=10A/µs; VD=0.67·VDRM ;VR=100V; dVD/dt=20V/µs TVJ=TVJM; IT=ITAVM;diR/dt=10A/µs; VR=0.5·VRRM ;VRM=0.8·VRRM TVJ=TVJM 2 µs tq 350 µs Qr VTO TVJ TVJM Tstg RthJÑ RthÑH F W à recovered charge threshold voltage working junction temperature maximum working junction temperature storage temperature thermal resistance; junction to case thermal resistance; case to heatsink clamping force weight maximum allowable acceleration 7.5 1.22 mAs V O -40...+125 125 -40...+125 DC, two-sided cooling two-sided cooling 0.022 0.007 22 610 50 C O C C O K/W K/W kN g m/s 2 2-i 3.5H 2 20° i 73 max i 47 26.5 i 47 i 66 SEMPO Electronic Limited www.sempoel.com 1400 1200 1000 typ. 800 max. I T [A] 600 400 200 0 0 0.5 1 1.5 VT [V] 2 2.5 3 3.5 Limiting on-state characteristic iT = f (VT) ÒVj = TVj max SEMPO Electronic Limited www.sempoel.com 30 20 10 ñ 5 a -40°Ñ 2 +25°Ñ +125°Ñ 1 b 0.5 0.2 10 20 50 100 200 iG [mA] 500 1000 2000 5000 10000 Gate characteristic VG=f(iG) with triggering area for VD = 6V Maximum rated peak gate power dissipation PGM = f (tg): a - 20 W (10ms) b - 40 W (1ms) c - 60 W (0.5ms) SEMPO Electronic Limited www.sempoel.com 0.03 0.025 0.015 0.01 0.005 0.001 0.01 0.1 t [s] 1 10 0 100 Transient thermal impedance Z thJC = f(t) DC, two-sided cooling Features: C Hermetic metal case with ceramic insulator C Capsule packages for double sided cooling C International standard case C Amplifying gates Typical Applications: C DC motor control C AC motor soft starter C Controlled rectifiers C AC controllers SEMPO Electronic Limited www.sempoel.com Z th JC [K/W] 0.02