1N6464US

1N6461US THRU 1N6468US QPL 500 Watt Surface Mount TVS POWER DISCRETES Description The 1N64xx series of transient voltage suppressors are designed to protect military and commercial electronic equipment from overvoltages caused by lightning, ESD, EFT, inductive load switching, and EMP. These devices are constructed using a p-n junction TVS diode in a hermetically sealed, voidless glass package. The hermetically sealed package provides high reliability in harsh environmental conditions. TVS diodes are further characterized by their high surge capability, low operating and clamping voltages, and a theoretically instantaneous response time. This makes them ideal for use as board level protection for sensitive semiconductor components. These devices are DESC QPL qualified to MIL-S-19500/ 551. Features 500 Watts peak pulse power (tp = 10/1000µs) Voidless hermetically sealed glass package Metallurgically bonded High surge capacity Unidirectional Available in JTX, and JTXV versions per MIL-S-19500/551 Applications Aerospace and industrial electronics Board level protection Airborne systems Shipboard systems Ground systems Mechanical Characteristics Hermetically sealed glass package Absolute Maximum Ratings Rating Peak Pulse Power (tp = 10 x 1000µs) Storage Temperature Range Steady-State Power Dissipation @ TL = 75°C (3/8") Symbol P pk TSTG PD Value 500 -65 to +175 3 Units Watts °C Watts Revision: August 8, 2007 1 www.semtech.com 1N6461US THRU 1N6468US POWER DISCRETES Electrical Characteristics Electrical specifications @ TA = 25°C unless otherwise specified. Device Type Reverse Standoff Voltage VRWM V Reverse L eakag e Current IR µA 3000 2500 500 500 50 3 2 2 Minimum Breakdow n Voltage VBR @ IT V 5.6 6.5 13.6 16.4 27.0 33.0 43.7 54.0 Test Current IT mA 25 20 5 5 2 1 1 1 Maximum Clamping Voltage VC @ IPP V 9.0 11.0 22.6 26.5 41.4 47.5 63.5 78.5 Peak Pulse Current IPP TP = 1mS A 56 46 22 19 12 11 8 6 Peak Pulse Current IPP TP = 20µS A 315 258 125 107 69 63 45 35 Temp. Coef. of V BR αVZ % / °C 0.040 0.040 0.050 0.060 0.084 0.093 0.094 0.096 1N6461US 1N6462US 1N6463US 1N6464US 1N6465US 1N6466US 1N6467US 1N6468US 5 6 12 15 24 30.5 40.3 51.6  2007 Semtech Corp. 2 www.semtech.com 1N6461US THRU 1N6468US POWER DISCRETES Electrical Characteristics PEAK PULSE POWER vs. PULSE TIME 10 x 1000µs IMPULSE WAVEFORM STEADY STATE DERATING CHARACTERISTICS FOR FREE AIR MOUNTING PULSE DERATING CURVE  2007 Semtech Corp. 3 www.semtech.com 1N6461US THRU 1N6468US POWER DISCRETES Ordering Information Part Number 1N6461US, 1N6462US, 1N6463US, 1N6464US, 1N6465US, 1N6466US, 1N6467US, 1N6468US Description Surface Mount (US)(1) Note: (1) Available in trays and tape and reel packaging. Please consult factory for quantities. Outline Drawing B D C A D Dimensions 1N 6461U S - 1N 6468U S Inches MIN A B C D 0.200 0.019 0.003 0.137 MAX 0.225 0.028 0.148 Millimeters MIN 5.08 0.48 0.08 3.48 MAX 5.72 0.71 3.76 Notes: (1) Dimensions are in inches. (2) Metric equivalents are given for general information only. Contact Information Semtech Corporation Power Discretes Products Division 200 Flynn Road, Camarillo, CA 93012 Phone: (805)498-2111 FAX (805)498-3804  2007 Semtech Corp. 4 www.semtech.com