SC1453-2.5ISKTR

POWER MANAGEMENT Description The SC1453 is a low dropout linear regulator that operates from a +2.5V to +6.5V input range and delivers up to 150mA. A PMOS pass transistor allows the low 75µA supply current to remain independent of load, making these devices ideal for battery operated portable equipment such as cellular phones, cordless phones and personal digital assistants. 150mA Ultra Low Dropout Regulator with Low Noise Bypass PRELIMINARY Features u “2982/5205” compatible pinout u Guaranteed 150 mA output current u Very small external components - designed to work with ceramic capacitors Low 25µVRMS output noise Very low supply current Thermal overload protection Reverse battery protection Low power shutdown Full industrial temperature range Surface mount packaging (5 pin SOT-23) SC1453 u u u The SC1453 has a bandgap reference bypass pin for u very low noise operation - a 10nF (typ.) capacitor is u connected between this pin and ground. Other features u include low powered shutdown, short circuit protection, u thermal shutdown protection and reverse battery protection. The SC1453 comes in the tiny 5 lead SOT-23 package. Applications u u u u u u u Battery Powered Systems Cellular Telephones Cordless Telephones Personal Digital Assistants Portable Instrumentation Modems PCMCIA cards Typical Application Circuit U1 VIN C1 1uF 1 3 IN EN SC1453 OUT GND BYP 2 5 4 VOUT C3 1uF C2 10nF Revision 2, December 2000 1 www.semtech.com SC1453 POWER MANAGEMENT Absolute Maximum Ratings Parameter Input Supply Voltage Thermal Resi stance Juncti on to Ambi ent Thermal Resi stance Juncti on to C ase Operati ng Ambi ent Temperature Range Operati ng Juncti on Temperature Range Storage Temperature Range Lead Temperature (Solderi ng) 10 Sec. ESD Rati ng Sy mbol VIN q JA q JC TA TJ TSTG TLEAD ESD Maximum -0.6 to +7 256 81 -40 to +85 -40 to +125 -65 to 150 300 2 PRELIMINARY U nits V °C /W °C /W °C °C °C °C kV Electrical Characteristics Unless specified: VIN = VOUT + 1V, VEN = VIN, IOUT = 100µA, TA = 25°C. Values in bold apply over full operating ambient temperature range. Parameter IN Supply Voltage Range Supply C urrent Sy mbol C onditions Min Ty p Max U nits VIN IQ IOUT = 0ma to150mA 2.25 75 6.50 130 160 V µA VIN = 6.5V, VEN = 0V 0.1 1.0 1.5 µA OU T Output Voltage (1) VOUT IOUT = 1mA 0mA £ IOUT £ 150mA, VOUT +1V £ VIN £ 5.5V Li ne Regulati on (1) REG(LINE) (VOUT(NOM) + 0.1V) £ VIN £ 5.5V, IOUT = 1mA -1.5% -3.0% 2.5 VOUT +1.5% +3.0% 10 12 Load Regulati on (1) REG(LOAD) IOUT = 0.1mA to 150mA -5 -20 -30 mV mV V ã 2000 Semtech Corp. 2 www.semtech.com SC1453 POWER MANAGEMENT Electrical Characteristics (Cont.) Parameter Out (C ont.) C urrent Li mi t D ropout Voltage(1)(2) ILIM VD IOUT = 1mA IOUT = 50mA 400 1 50 70 90 IOUT = 100mA 100 140 180 IOUT = 150mA 150 210 270 Output Voltage Noi se en 10Hz to 100kHz, IOUT = 1mA C BYP = 10nF, C OUT = 1µF C OUT = 100µF Power Supply Rejecti on Rati o EN Enable Input Threshold VIH VIL Enable Input Bi as C urrent(3) Ov er Temperature Protection Hi gh Tri p Level Hysteresi s THI THYST 150 20 °C °C IEN 0V £ VEN £ VIN -0.5 0 1.6 0.4 +0.5 µA V PSRR f = 120Hz, C BYP = 10nF 45 25 60 dB µVRMS mV mV mA mV mV Sy mbol C onditions Min PRELIMINARY Unless specified: VIN = VOUT + 1V, VEN = VIN, IOUT = 100µA, TA = 25°C. Values in bold apply over full operating ambient temperature range. Ty p Max U nits NOTES: (1) Low duty cycle pulse testing with Kelvin connections required. (2) Defined as the input to output differential at which the output voltage drops 100mV below the value measured at a differential of 1V. Not measurable on 1.5V and 1.8V parts due to minimum VIN constraints. (3) Guaranteed by design. ã 2000 Semtech Corp. 3 www.semtech.com SC1453 POWER MANAGEMENT Pin Configuration Top View PRELIMINARY Ordering Information Part N umber SC 1453-X.XISKTR (1)(2) P ackag e SOT-23-5 SOT-23-5L Notes: (1) Where -X.X denotes voltage options. Available voltages are: 1.5V, 1.8V, 2.5V, 2.7V, 2.8V, 3.0V and 3.3V. (2) Only available in tape and reel packaging. A reel contains 3000 devices. Pin Descriptions Pin # 1 2 3 4 5 Pin N ame IN GND EN BYP OUT Pin Function Input pi n. Ground pi n. C an be used for heatsi nki ng i f needed. Acti ve hi gh enable pi n. C onnect to IN i f not bei ng used. Reference bypass. C onnect a 10nF capaci tor (typi cal, 1nF mi ni mum) between thi s pi n and GND to reduce output noi se. Regulator output, sourci ng up to 150mA. Block Diagram ã 2000 Semtech Corp. 4 www.semtech.com SC1453 POWER MANAGEMENT Outline Drawing - SOT-23-5 PRELIMINARY Land Pattern - SOT-23-5 Contact Information Semtech Corporation Power Management Products Division 652 Mitchell Rd., Newbury Park, CA 91320 Phone: (805)498-2111 FAX (805)498-3804 ã 2000 Semtech Corp. 5 www.semtech.com