SMDA15C-7

厂商：
SEMTECH
封装：
描述：
SMDA15C-7 - Bidirectional TVS Array for Protection of Seven Lines　　　 - Semtech Corporation

数据手册：

下载SMDA15C-7.pdf

立即购买

详情介绍
数据手册
价格&库存

SMDA15C-7 数据手册

SMDA05C-7 THRU SMDA24C-7 PROTECTION PROTECTION PRODUCTS Description The SMDAxxC-7 series of transient voltage suppressors are designed to protect components which are connected to data and transmission lines from voltage surges caused by ESD (electrostatic discharge), EFT (electrical fast transients), and lightning. TVS diodes are characterized by their high surge capability, low operating and clamping voltages, and fast response time. This makes them ideal for use as board level protection of sensitive semiconductor components. The SMDAxxC-7 is designed to provide transient suppression on multiple data lines and I/O ports. The low profile SO-8 design allows the user to protect up to seven data and I/O lines with one package. The SMDAxxC-7 TVS diode array will meet the surge requirements of IEC 61000-4-2 (Formerly IEC 801-2), Level 4, Human Body Model for air and contact discharge. Bidirectional TVS Array for Protection of Seven Lines Features u Transient protection for data lines to IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) IEC 61000-4-5 (Lightning) 12A (8/20µs) Small SO-8 surface mount package Protects seven I/O lines Working voltages: 5V, 12V, 15V and 24V Low leakage current Low operating and clamping voltages Solid-state silicon avalanche technology u u u u u u u u u u u u u u u u u u Mechanical Characteristics JEDEC SO-8 package Molding compound flammability rating: UL 94V-0 Marking : Part number, date code, logo Packaging : Tube or Tape and Reel per EIA 481 Applications RS-232 & RS-422 Data Lines Microprocessor Based Equipment LAN/WAN Equipment Notebooks, Desktops, & Servers Instrumentation Peripherals Set Top Box Serial and Parallel Ports Schematic & PIN Configuration SO-8 (Top View) Revision 9/2000 1 www.semtech.com SMDA05C-7 THRU SMDA24C-7 PROTECTION PRODUCTS Absolute Maximum Rating R ating Peak Pulse Pow er (tp = 8/20µs) Lead Soldering Temp erature Op erating Temp erature Storage Temp erature Symbo l Pp k TL TJ TSTG Value 300 260 (10 sec.) -55 to +125 -55 to +150 Units Watts °C °C °C Electrical Characteristics SMDA05C-7 Par ame te r Reverse Stand-Off Voltage Reverse Breakdow n Voltage Reverse Leakage Current Clamp ing Voltage Maximum Peak Pulse Current Junction Cap acitance Symbo l VRWM V BR IR VC I PP Cj It = 1mA VRWM = 5V, T=25°C IPP = 1A, tp = 8/20µs tp = 8/20µs Betw een I/O Pins and Gnd V R = 0V, f = 1MHz 6 20 9.8 17 350 Co nd itio ns Minimum Typ ical Maximum 5 Units V V µA V A pF SMDA12C-7 Par ame te r Reverse Stand-Off Voltage Reverse Breakdow n Voltage Reverse Leakage Current Clamp ing Voltage Maximum Peak Pulse Current Junction Cap acitance Symbo l VRWM V BR IR VC I PP Cj It = 1mA VRWM = 12V, T=25°C IPP = 1A, tp = 8/20µs tp = 8/20µs Betw een I/O Pins and Gnd V R = 0V, f = 1MHz 13.3 1 19 12 120 Co nd itio ns Minimum Typ ical Maximum 12 Units V V µA V A pF ã 2000 Semtech Corp. 2 www.semtech.com SMDA05C-7 THRU SMDA24C-7 PROTECTION PRODUCTS Electrical Characteristics (Continued) SMDA15C-7 Par ame te r Reverse Stand -Off Voltage Reverse Breakd ow n Voltage Reverse Leakage Current Clamp ing Voltage Maximum Peak Pulse Current Junction Cap acitance Symbo l V RWM V BR IR VC I PP Cj It = 1mA V RWM = 15V, T=25°C IPP = 1A , tp = 8/20µ s tp = 8/20µ s Betw een I/O Pins and Gnd V R = 0V, f = 1MHz 16.7 1 24 10 75 Co nd itio ns Minimum Typ ical Maximum 15 Units V V µA V A pF SMDA24C-7 Par ame te r Reverse Stand-Off Voltage Reverse Breakdow n Voltage Reverse Leakage Current Clamp ing Voltage Maximum Peak Pulse Current Junction Cap acitance Symbo l VRWM V BR IR VC I PP Cj It = 1mA VRWM = 24V, T=25°C IPP = 1A, tp = 8/20µs tp = 8/20µs Betw een I/O Pins and Gnd V R = 0V, f = 1MHz 26.7 1 43 5 50 Co nd itio ns Minimum Typ ical Maximum 24 Units V V µA V A pF ã 2000 Semtech Corp. 3 www.semtech.com SMDA05C-7 THRU SMDA24C-7 PROTECTION PRODUCTS Typical Characteristics Non-Repetitive Peak Pulse Power vs. Pulse Time 10 110 100 Peak Pulse Power - P PP (kW) 90 % of Rated Power or IPP 80 70 60 50 40 30 20 10 0.01 0.1 1 10 Pulse Duration - tp (µs) 100 1000 0 0 25 50 75 100 125 150 Ambient Temperature - TA (oC) 1 Power Derating Curve 0.1 Pulse Waveform 110 100 90 80 Percent of IPP 70 60 50 40 30 20 10 0 0 5 10 15 Time (µs) 20 25 30 td = IPP/2 e -t Waveform Parameters: tr = 8µs td = 20µs ESD Pulse Waveform (IEC 61000-4-2) Level IEC 61000-4-2 Discharge Parameters First Peak Current (A) 1 2 3 4 7.5 15 22.5 30 Peak Current at 30 ns (A) 4 8 12 16 Peak Current at 60 ns (A) 8 4 6 8 Test Test Voltage Voltage (Contact ( A ir Disch arge) Disch arge) (kV ) (kV ) 2 4 6 8 2 4 8 15 ã 2000 Semtech Corp. 4 www.semtech.com SMDA05C-7 THRU SMDA24C-7 PROTECTION PRODUCTS Applications Information Device Connection for Protection of Seven Data Lines The SMDAxxC-7 is designed to protect up to 7 data or I/O lines. They are bidirectional devices and may be used on lines where the signal polarities are above and below ground. The SMDAxxC-7 TVS arrays employ a monolithic structure. Therefore, the working voltage (VRWM) and breakdown voltage (VBR) specifications apply to the differential voltage between any two data line pins. For example, the SMDA24C-7 is designed for a maximum voltage excursion of +/-12V between any two data lines. The device is connected as follows: l Circuit Diagram Connection Diagram DATA IN DATA OUT Pins 1, 2, 3, 4, 5, 6 and 7 are connected to the lines that are to be protected. Pin 8 is connected to ground. The ground connections should be made directly to the ground plane for best results. The path length is kept as short as possible to reduce the effects of parasitic inductance in the board traces. 8 7 6 5 Circuit Board Layout Recommendations for Suppression of ESD. Good circuit board layout is critical for the suppression of ESD induced transients. The following guidelines are recommended: l l l l l l 1 2 3 4 Place the TVS near the input terminals or connectors to restrict transient coupling. Minimize the path length between the TVS and the protected line. Minimize all conductive loops including power and ground loops. The ESD transient return path to ground should be kept as short as possible. Never run critical signals near board edges. Use ground planes whenever possible. DATA IN DATA OUT ã 2000 Semtech Corp. 5 www.semtech.com SMDA05C-7 THRU SMDA24C-7 PROTECTION PRODUCTS Outline Drawing - SO-8 Land Pattern - SO-8 ã 2000 Semtech Corp. 6 www.semtech.com SMDA05C-7 THRU SMDA24C-7 PROTECTION PRODUCTS Ordering Information Par t Numbe r SMDA 05C-7.TB SMDA 05C-7.TE SMDA 12C-7.TB SMDA 12C-7.TE SMDA 15C-7.TB SMDA 15C-7.TE SMDA 24C-7.TB SMDA 24C-7.TE Wo r king Vo ltage 5V 5V 12V 12V 15V 15V 24V 24V Qty p e r Reel 500 2,500 500 2,500 500 2,500 500 2,500 R e e l Size 7 Inch 13 Inch 7 Inch 13 Inch 7 Inch 13 Inch 7 Inch 13 Inch Note: (1) No suffix indicates tube pack. Contact Information Semtech Corporation Protection Products Division 652 Mitchell Rd., Newbury Park, CA 91320 Phone: (805)498-2111 FAX (805)498-3804 ã 2000 Semtech Corp. 7 www.semtech.com

下载 PDF

SMDA15C-7

1. 物料型号： - SMDA05C-7：5V工作电压 - SMDA12C-7：12V工作电压 - SMDA15C-7：15V工作电压 - SMDA24C-7：24V工作电压

2. 器件简介： - SMDAxC-7系列瞬态电压抑制器设计用于保护连接到数据和传输线路的组件免受由ESD（静电放电）、EF（电力快速瞬变）和雷电引起的电压浪涌的影响。TVS二极管以其高浪涌能力、低工作和钳位电压以及快速响应时间而闻名，使其成为保护敏感半导体组件的理想选择。

3. 引脚分配： - SO-8封装，引脚1至7连接至待保护的线路，引脚8连接至地。

4. 参数特性： - 反向工作电压（VRWM）：5V、12V、15V、24V - 反向击穿电压（VBR）：分别为6V、13.3V、16.7V、26.7V - 反向漏电流（IR）：分别为20uA、1uA、1uA、1uA - 钳位电压（Vc）：分别为9.8V、19V、24V、43V - 最大峰值脉冲电流（PP）：分别为17A、12A、10A、5A - 结电容（C）：分别为350pF、120pF、75pF、50pF

5. 功能详解： - 提供数据线路的瞬态保护，符合IEC 61000-4-2(ESD)、IEC 61000-4-4(EFT)、IEC 61000-4-5(Lightning)标准。 - 低泄漏电流、低工作和钳位电压、固态硅雪崩技术。

6. 应用信息： - RS-232 & RS-422数据线、基于微处理器的设备、局域网/广域网设备、笔记本电脑、台式电脑、服务器、仪器仪表、外围设备、机顶盒、串行和并行端口。

7. 封装信息： - SO-8封装，JEDEC标准，封装材料阻燃等级为UL 94V-0，标记包括零件编号、日期代码、标志，包装为管装或带卷轴的EIA 481标准。

SMDA15C-7 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“SMDA15C-7”相匹配的价格&库存，您可以联系我们找货

免费人工找货

搜索历史

SMDA15C-7

相关技术文章