2W10M

2W005M THRU 2W10M SINGLE-PHASE SILICON BRIDGE RECTIFIERS Reverse Voltage – 50 to 1000 Volts Forward Current – 2.0 Amperes Features • Surge overload ratings to 50 amperes peak • Ideal for printed circuit board • Reliable low cost construction technique results in inexpensive product • High temperature soldering guaranteed: 250oC/10 seconds/0.375”(9.5mm) lead length at 5 lbs., (2.3kg) tension. Mechanical Data • Case: Molded plastic • Lead: Solder plated • Polarity: As marked Absolute Maximum Ratings and Characteristics Rating at 25oC ambient temperature unless otherwise specified. Single-phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbols Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current O at TA = 50 C Peak forward surge current , 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum instantaneous forward voltage @ 2A Maximum DC reverse current at rated DC blocking voltage @ TA = 25 C O @ TA = 100 C O 2W 005M 50 35 50 2W 01M 100 70 100 2W 02M 200 140 200 2W 04M 400 280 400 2 2W 06M 600 420 600 2W 08M 800 560 800 2W 10M 1000 700 1000 Units V V V A VRRM VRMS VDC I(AV) IFSM VF IR IR RθJA RθJL 50 A 1.1 10 500 40 15 -55 to +125 -55 to +150 O O V uA uA C/W C/W O Typical thermal resistance(Note 1) Operating temperature range Storage temperature range TJ TS C C O Note: (1) Thermal resistance from junction to ambient and from junction to lead at 0.375” (9.5mm) lead length for P.C.B. mounting. SEMTECH ELECTRONICS LTD. (Subsidiary of Sino-Tech International Holdings Limited, a company listed on the Hong Kong Stock Exchange, Stock Code: 724) ® Dated : 26/09/2003 2W005M THRU 2W10M RATINGS AND CHARACTERISTIC CURVES PEAK FORWARD SURGE CURRENT.(A) FIG. 1-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT 50 FIG. 2-MAXIMUM CURRENT DERATING CURVE OUTPUT RECTIFIED CURRENT AVERAGE FORWARD CURRENT.(A) 2.0 40 8.3 ms Single Half Sine Wave JEDEC Method RESISTIVE INDUCTIVE LOAD 1.5 30 1.0 20 10 1 0.5 0 1 10 100 0 20 40 60 80 100 120 140 NUMBER OF CYCLES AT 60Hz AMBIENT TEMPERATURE,o C FIG. 3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER BRIDGE ELEMENT FIG. 4-TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 10 INSTANTANEOUS FORWARD CURRENT.(A) 10 INSTANTANEOUS REVERSE CURRENT TJ =100 oC 1.0 1.0 0.1 TJ =25o C PULSE WIDTH-300 S 2% DUTY CYCLE 0.1 TJ =25oC 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.01 0 20 40 60 80 100 120 140 INSTANTANEOUS FORWARD VOLTAGE, (V) PERCENT OF RATED PEAK REVERSE VOLTAGE.(%) SEMTECH ELECTRONICS LTD. (Subsidiary of Sino-Tech International Holdings Limited, a company listed on the Hong Kong Stock Exchange, Stock Code: 724) ® Dated : 26/09/2003