FR105S

FR101S THRU FR107S FAST RECOVERY RECTIFIERS Reverse Voltage – 50 to 1000 Volts Forward Current – 1.0 Ampere Features • High Current Capability • Fast switching for high efficiency • Exceeds Environmental Standards of MIL-S-19500/228 • 1 ampere operation at TA = 55oC with no thermal runaway • Low Leakage. Mechanical Data • Case: Molded plastic, A-405 • Lead: Axial leads, solderable per MIL-STD-202, method 208 guaranteed. • Polarity: Color band denotes cathode end • Mounting Position: Any Absolute Maximum Ratings and Characteristics Ratings at 25℃ ambient temperature unless otherwise specified, single phase, half wave, 60Hz, resistive or inductive load, for capacitive load, derate current by 20%. Symbols Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Average forward rectified current .375” (9.5mm) lead length at TA = 55 OC Peak forward surge current 8.3mS single half sine-wave superimposed on rated load (JEDEC method) Maximum forward voltage at 1A DC and 25oC Maximum reverse current at rated DC blocking voltage TA = 25℃ TA = 100℃ IR Trr CJ RΘJA TJ ,TS 150 12 67 -55 to +150 VF 1.3 5 500 250 500 Volts µA nS pF ℃/W ℃ IFSM 30 Amps I(AV) 1 Amp VRRM VRMS VDC FR 101S 50 35 50 FR 102S 100 70 100 FR 103S 200 140 200 FR 104S 400 280 400 FR 105S 600 420 600 FR 106S 800 560 800 FR 107S 1000 700 1000 Units Volts Volts Volts Maximum reverse recovery time (Note 1) Typical junction capacitance (Note 2) Typical thermal resistance (Note3) Operating and storage temperature range 1) Reverse recovery test conditions: IF = 0.5A, IR = 1A, Irr = 0.25A. 2) Measured at 1MHZ and applied reverse voltage of 4 VDC . 3) Thermal resistance junction to ambient and form junction to lead at 0.375” (9.5mm) lead length P.C.B. mounted. SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 23/08/2004