KBPC5001

KBPC50005 THRU KBPC5010 HIGH CURRENT SINGLE-PHASE BRIDGE RECTIFIERS REVERSE VOLTAGE: 50 TO 1000 VOLTS FORWARD CURRENT: 50 AMPERES Features KBPC • • Low power loss, high efficiency Low reverse leakage current Absolute Maximum Ratings and Characteristics Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load, For capacitive load, derate current by 20%. Symbols KBPC 50005 KBPC 5001 KBPC 5002 KBPC 5004 KBPC 5006 KBPC 5008 KBPC 5010 Units Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Average forward rectified current at TC = 55 C Peak forward surge current, 8.3ms single half sine wave superimposed on rated load ( JEDEC) Maximum forward voltage at 25A DC and 25℃ Maximum reverse current at rated DC blocking voltage TA = 25 C O TA = 125 C O O VRRM VRMS VDC IO IFSM VF IR Cj RθJC TJ ,TSTG 50 35 50 100 70 100 200 140 200 400 280 400 50 400 1.2 10 1000 300 2.6 600 420 600 800 560 800 1000 700 1000 V V V A A V µA pF O Typical junction capacitance (note 1) Typical thermal resistance (note 2) Operating junction and storage temperature range C/W O -55 to +150 C Notes: 1. Measured at 1.0MHz and applied reverse voltage of 4.0 V.DC 2. Thermal resistance from junction to case per leg. SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 19/07/2005 KBPC50005 THRU KBPC5010 FORWARD CURRENT DERATING CURVE Typical forward characteristics per bridge element 60 AVERAGE FORWARD CURRENT, A 100 50 40 30 20 10 0 50 100 150 0.01 0.4 Forward current, A 10 1 0.1 Tj=25 C Pulse width=300 S 1% Duty Cycle CASE TEMPERATURE, C 0.8 1.2 1.6 2.0 Forward voltage, V Maximum non-repetitive peak forward surge current per element 500 Peak forward surge current , A Typical Reverse Leakage Characteristics Per Bridge element 1000 Tj=125 C 100 Reverse current, 100 A 10 1 Single sine wave (JEDEC method) 10 0.1 Tj=25 C 1 10 Number of cycles at 50Hz 100 0.01 0 20 40 60 80 100 Percent of rated peak reverse voltage, % Typical junction capacitance per bridge element 1000 Junction capacitance,pF 100 f=1MHz Tj=25 oC 10 1 10 Reverse voltage, V 100 SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 19/07/2005