KBU10005

KBU10005 THRU KBU1010 SINGLE-PHASE SILICON BRIDGE RECTIFIER REVERSE VOLTAGE: 50 to 1000 V FORWARD CURRENT: 10 A Features • Reliable low cost construction utilizing molded plastic technique • Low forward voltage drop • Low reverse leakage current • High surge current capability • Ideal for printed circuit board Mechanical Data • Case: Molded plastic, KBU • Epoxy: UL 94V-0 rate flame retardant • Terminals: leads solderable per MIL-STD-202, Method 208 guaranteed • Mounting Position: Any Absolute Maximum Ratings and Characteristics Ratings at 25 OC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Parameter Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current 0.375"(9.5 mm) Lead Length at TA = 55 OC Peak Forward Surge Current 8.3 ms Single Half-Sine -Wave Superimposed on Rated Load (JEDEC Method) Maximum Forward Voltage at 10 A Maximum Reverse Current at Rated DC Blocking Voltage Typical Thermal Resistance Typical Thermal Resistance 1) 2) Symbols VRRM VRMS VDC I(AV) IFSM VF TA = 25 C O KBU10005 KBU1001 KBU1002 KBU1004 KBU1006 KBU1008 KBU1010 Units 50 35 50 100 70 100 200 140 200 400 280 400 10 300 1.1 10 500 18 3 - 55 to + 125 O 600 420 600 800 560 800 1000 700 1000 V V V A A V µA C/W C/W O TA = 100 OC IR RθJA RθJC TJ ,TS O Operating and Storage Temperature Range 1) 2) C Units mounted in free air, no heatsink, P.C.B at 0.375" (9.5 mm) lead length with 0.5 X 0.5" (12 X 12 mm) copper pads. Units mounted on a 3 X 3 X 0.11" (7.5 X 7.5 X 0.3 cm) thick Al. plate heatsink. SEMTECH ELECTRONICS LTD. (Subsidiary of Semtech International Holdings Limited, a company listed on the Hong Kong Stock Exchange, Stock Code: 724) R Dated : 01/08/2006 H KBU10005 THRU KBU1010 SEMTECH ELECTRONICS LTD. (Subsidiary of Semtech International Holdings Limited, a company listed on the Hong Kong Stock Exchange, Stock Code: 724) R Dated : 01/08/2006 H