LM120

LM120 THRU LM1100 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Reverse Voltage - 20 to 100 V Forward Current - 1 A Features • High current capability • High surge current capability • Low forward voltage drop • For use in low voltage, high frequency inverters free wheeling ,and polarity protection applications Mechanical Data • Case: MiniMELF (DO-213AA), molded plastic body • Terminals: Solder plated, solderable per MIL-STD-750, method 2026 • Polarity: Color band denotes cathode end • Mounting Position: Any MiniMELF (DO-213AA) Plastic Package Absolute Maximum Ratings and Characteristics Ratings at 25 OC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Parameter Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current 0.375" (9.5 mm) Lead Length Peak Forward Surge Current 8.3 ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) Maximum Forward Voltage at 1 A and 25 OC Maximum Reverse Current at Rated DC Blocking Voltage Typical Junction Capacitance 1) Typical Thermal Resistance 2) Operating Junction Temperature Range Storage Temperature Range 1) 2) Symbols LM120 VRRM VRMS VDC IF(AV) 20 14 20 LM130 LM140 LM150 LM160 LM180 LM1100 Units 30 21 30 40 28 40 50 35 50 1 60 42 60 80 56 80 100 80 100 V V V A IFSM VF 0.55 40 0.7 0.5 10 110 75 - 55 to + 125 - 55 to + 150 - 55 to + 150 O A 0.85 V mA pF C/W O TA = 25 C TA = 100 OC O IR CJ RθJA Tj Tstg C C O Measured at 1 MHz and applied reverse voltage of 4 VDC. Thermal resistance junction to ambient 0.24" X 0.24"(6 X 6 mm) copper pads to each terminals SEMTECH ELECTRONICS LTD. (Subsidiary of Sino-Tech International Holdings Limited, a company listed on the Hong Kong Stock Exchange, Stock Code: 724) ® Dated : 12/02/2009 LM120 THRU LM1100 SEMTECH ELECTRONICS LTD. (Subsidiary of Sino-Tech International Holdings Limited, a company listed on the Hong Kong Stock Exchange, Stock Code: 724) ® Dated : 12/02/2009