R1200

R1200 THRU R2000 HIGH VOLTAGE SILICON RECTIFIERS Reverse Voltage – 1200 to 2000 Volts Forward Current – 0.2 to 0.5 Ampere Features • • • • • • • Low cost Low leakage Low forward voltage drop High current capability Case: Molded plastic, DO-41 Mounting Position: Any Terminals: Axial leads, solderable per MIL-STD-202 Mechanical Data Absolute Maximum Ratings and Characteristics Ratings at 250C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz. resistive or inductive load. For capacitive load, derate current by 20%. Symbols R1200 R1500 R1800 R2000 Units Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TA = 55℃ Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load(JEDEC method) Maximum instantaneous forward voltage at 0.5A/0.2A DC Maximum DC reverse current at rated DC blocking voltage @TA = 25℃ @TA = 100℃ IR VRRM VRMS VDC IO IFSM VF 2 5 µAmps 100 30 CJ T J ,T S 30 -55 to +150 µAmps pF ℃ 1200 840 1200 1500 1050 1500 500 30 3 1800 1260 1800 2000 1400 2000 200 Volts Volts Volts mAmps Amps Volts Maximum full load reverse current average, Full cycle 0.375” (9.5 mm) lead length at TL = 75℃ Typical junction capacitance (Note ) Operating and storage temperature range Notes: Measured at 1MHZ and applied reverse voltage of 4volts. SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 30/03/2005 H R1200 THRU R2000 SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 30/03/2005 H