RG3J-10

RG3J-10 GLASS PASSIVATED JUNCTION RECTIFIER Forward Current – 3.0 Amperes Features • Cavity-free glass passivated junction • High temperature metallurgically bonded construction • High temperature soldering guaranteed: 350oC/10 seconds,0.375”(9.5mm) lead length, 5 lbs, (2.3kg) tension Mechanical Data • Case: Solid glass body. • Terminals: Solder plated axial leads, solderable per MIL-STD-750.Method 2026. • Polarity: Color band denotes cathode end. • Mounting Position: Any • Weight: 0.04 ounce, 1.1 grams. Absolute Maximum Ratings and Characteristics Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375” (9.5mm) lead length at TA=70 OC Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum full load reverse current, full cycle average, 0.375”(9.5mm)lead length at TA=70 OC Maximum instantaneous forward voltage at 3A TA = 25 OC Maximum DC reverse current at rated DC blocking voltage Typical junction capacitance at 4V, 1MHz Typical thermal resistance (Note 1) Operating junction temperature range Storage temperature range Notes: Ratings at 25 C ambient temperature unless otherwise specified. 0 Symbols VRRM VRMS VDC IF(AV) IFSM IR(AV) VF IR CJ RθJA RθJL TJ TS Value 400 280 400 3 125 150 1.3 5 300 40 20 10 -65 to+175 -65 to+200 Units Volts Volts Volts Amps Amps µA Volts µA pF O TA = 25 C TA = 175OC O C/W O O C C (1) Thermal resistance from junction to ambient and from junction to lead at 0.375”(9.5mm) lead length with both leads attached between heat sink. SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 23/06/2003 RG3J-10 Ratings and Characteristic Curves (TA=25oC unless otherwise noted) FIG.2 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT AVERAGE FORWARD CURRENT AMPERES AMERAGE FORWARD RECTIFIED CURRENT AMPERES FIG.1 FORWARD CURRENT DERATING CURVE 4.0 3.0 2.0 1.0 0 0 0.375" (9.5mm) LEAD LENGTH 25 50 75 100 125 150 175 60Hz RESISTIVE OR INDUCTIVE 10AD 200 100 Tj=Tj max 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) AMBIENT TEMPERATURE oC 10 1 10 NUMBER OF CYCLES AT 60 Hz 100 FIG.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 20 INSTANTANEOUS FORWARD CURRENT AMPERES FIG.4 TYPICAL REVERSE CHARACTERISTICS 10.0 10 AVERAGE FORWARD CURRENT MICROAMPERES 1 Tj =150 C o Tj=25 C o 1 Tj=100 oC P ULSE WIDTH=300 1% DUTY CYCLE 0.1 s Tj=75 C 0.1 o Tj=25 C 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.01 0 INATANTANEOUS FORWARD REVERSE VOLTAGE VOLTS 20 40 60 80 100 o PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE pF 100 Tj=25 C f=1.0MHz Vsig=50mV p-p o 10 1 10 REVERSE VOLTAGE VOLTS 100 SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 23/06/2003