RGP15G

RGP15A THRU RGP15M FAST SWITCHING RECTIFIERS GLASS PASSIVATED JUNCTION Reverse Voltage – 50 to 1000 Volts Forward Current – 1.5 Amperes Features • High temperature metallurgically bonded construction • Cavity-free glass passivated junction. • 1.5 Ampere operation at TA = 55oC with no thermal runaway. • Typical IR less than 0.1µA • High temperature soldering guaranteed: 350oC/10seconds, 0.375” (9.5mm) lead length, 5 lbs. (2.3kg) tension Mechanical Data • Case: JEDEC DO-204AC, molded plastic over glass body. • Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 • Polarity: Color band denotes cathode end • Mounting Position: Any Absolute Maximum Ratings and Characteristics Ratings at 25oCambient temperature unless otherwise specified. Symbols Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current O 0.375” (9.5mm) lead length at TA = 55 C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum full load reverse current, full cycle O average 0.375” (9.5mm) lead length at TA = 55 C Maximum instantaneous forward voltage at 1.5A Maximum DC reverse current TA = 25 C O at rated DC blocking voltage TA = 150 C Maximum reverse recovery time IF=0.5A, IR=1A, Irr=0.25A. Typical junction capacitance at 4 V, 1MHz Typical thermal resistance (Note 1) Operating junction and storage temperature range O RGP 15A 50 35 50 RGP 15B 100 70 100 RGP 15D 200 140 200 RGP 15G 400 280 400 1.5 RGP 15J 600 420 600 RGP 15K 800 560 800 RGP 15M 1000 700 1000 Units V V V A VRRM VRMS VDC IF(AV) IFSM IR(AV) VF IR Trr CJ RθJA T J ,T S 150 50 100 1.3 5 200 250 25 45 -65 to +175 O A µA V µA µA 500 nS pF C/W O C Notes:1. Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B.mounted. SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 20/06/2003 RGP15A THRU RGP15M RATINGS AND CHARACTERISTIC CURVES ( T A=25 oC unless otherwise noted) FIG.1-FORWARD CURRENT DERATING CURVE 1.5 1.25 1.0 0.75 0.5 0.25 0.375" (9.5mm) lead length 0 25 50 75 100 125 150 175 RESISTIVE OR INDUCTIVE LOAD PEAK FORWARD SURGE CURRENT(A) FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 50 40 30 20 AVERAGE FORWARD RECTIFIED CURRENT (A) TJ=TJ max 8.3ms single half sine-wave (JEDEC Method) 10 0 1 10 NUMBER OF CYCLES AT 60 Hz 100 AMBIENT TEMPERATURE( o C) FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT(A) INSTANTANEOUS REVERSE LEAKAGE CURRENT( A) FIG.4-TYPICAL REVERSE CHARACTERISTICS 20 10 TJ =125 C o 10 1 TJ=25 oC PULSE WIDTH=300 s 1% DUTY CYCLE 1 TJ =75 oC 0.1 TJ=25 oC 0.01 0 20 40 60 80 100 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE (V) PERCENT OF RATED PEAK REVERSE VOLTAGE(%) FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE 100 100 JUNCTION CAPACITANCE(pF) TJ =25 oC f=1.0MHz Vsig=50mVP-P TRANSIENT THERMAL IMPEDANCE ( oC/W) FIG.5-TYPICAL JUNCTION CAPACITANCE 10 10 1 1 1 10 REVERSE VOLTAGE (V) 100 0.1 0.01 0.1 1 10 100 t, PULSE DURATION (sec.) SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 20/06/2003