RL1601CT

RL1601CT THRU RL1607CT GLASS PASSIVATED SILICON RECTIFIERS Reverse Voltage – 50 to 1000 Volts Forward Current – 16.0 Amperes Features • Low forward voltage drop • High current capability • High capability • High surge current capability Mechanical Data • Case: Molded plastic, TO-220 • Terminals: leads solderable per • MIL-STD-202, method 208 guaranteed • Polarity: As marked • Mounting Position: Any PIN 1 PIN 3 CASE PIN 2 PIN 1 PIN 3 PIN 1 CASE PIN 3 PIN 2 DOUBLER SUFFIX "D" CASE PIN 2 POSITIVE CT NEGATIVE CT SUFFIX "A" Dimensions in mm Absolute Maximum Ratings and Characteristics o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave,60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbols Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward Rectified current O 0.375”(9.5mm) Lead Length at TC = 100 C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum forward voltage at 8.0A DC and 25℃ Typical junction Capacitance (Note1) Typical thermal resistance (Note2) Maximum reverse current at rated DC blocking voltage @TC = 25OC @TC =125 OC IR T J ,T s VRRM VRMS VDC I(AV) RL RL RL RL RL RL RL 1601CT 1602CT 1603CT 1604CT 1605CT 1606CT 1607CT Units Volts Volts Volts Amps 50 35 50 100 70 100 200 140 200 400 280 400 16.0 600 420 600 800 560 800 1000 700 1000 IFSM 150 Amps VF CJ R0JC 1.1 50 3.0 10 250 -55 to +150 Volts pF ℃/W µAmps µAmps O Operating and storage temperature range C Notes :1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC. 2. Thermal resistance from junction to case per leg mounted on heatsink. SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 18/12/2003 RL1601CT THRU RL1607CT FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 175 AVERAGE FORWARD CURRENT.(A) 18 FIG.2-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PERLEG PEAK FORWARD SURGE CURRENT. (A) 150 125 100 75 50 25 0 16 14 Single phase half wave 60Hz resistive or inductive load 8.3ms Single Half Sine Wave JEDEC Method 12 10 8 0 CASE TEMPERATURE.(°C) 50 100 150 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz FIG.4- TYPICAL REVERSE CHARACTERISTICS PERLEG FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PERLEG INSTANTANEOUS FORWARD CURRENT. (A) 200 100 40 20 10 4 2 1 0.4 0.2 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Tj =25°C Pulse Width=300 s 1% Duty Cycle INSTANTANEOUS REVERSE CURRENT. ( A) 400 100 40 10 Tj =125°C 4 2 1.0 Tj =25°C 0.4 0.2 0.1 0 FORWARD VOLTAGE (V) FIG.5- TYPICAL JUNCTION CAPACITANCE PERLEG JUNCTION CAPACITANCE. (pF) 120 100 80 60 40 20 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) f=10MHz Vsig=50mVp-p Tj =25°C 0.1 0.4 1.0 4 10 40 100 400 1000 REVERSE VOLTAGE. (V) SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 18/12/2003