RL1604

RL1601 THRU RL1607 GLASS PASSIVATED SILICON RECTIFIERS Reverse Voltage – 50 to 1000 Volts Forward Current – 16.0 Amperes Features • Low forward voltage drop • High current capability • High capability • High surge current capability Mechanical Data • Case: Molded plastic, TO-220A • Terminals: leads solderable per • MIL-STD-202, method 208 guaranteed • Polarity: As marked • Mounting Position: Any PIN 1 PIN 2 CASE PIN 1 PIN 2 CASE CASE POSITIVE CASE NEGATIVE SUFFIX "R" Absolute Maximum Ratings and Characteristics Dimensions in mm o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbols Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward Rectified current O 0.375”(9.5mm) Lead Length at TC = 100 C Peak forward surge current 8.3ms single half -sine-wave superimposed on rated load (JEDEC method) Maximum forward voltage at 16.0A DC and 25℃ Typical junction Capacitance (Note1) Typical thermal resistance (Note2) Maximum reverse current at rated DC blocking voltage @TC = 25OC @TC =125 OC IR T J ,T s VRRM VRMS VDC I(AV) RL 1601 RL 1602 RL 1603 RL 1604 RL 1605 RL 1606 RL 1607 Units Volts Volts Volts Amps 50 35 50 100 70 100 200 140 200 400 280 400 16.0 600 420 600 800 560 800 1000 700 1000 IFSM 250 Amps VF CJ R0JC 1.1 100 2.0 10 250 -55 to +150 Volts pF ℃/W µAmps µAmps O Operating and storage temperature range C Notes :1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC. 2. Thermal resistance from junction to case mounted on heatsink. SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 12/12/2003 RL1601 THRU RL1607 FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 300 AVERAGE FORWARD CURRENT.(A) 18 FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT. (A) 250 200 150 100 50 0 1 2 5 10 20 50 100 8.3ms Single Half Sine Wave JEDEC Method 16 14 Single Phase Half Wave 60Hz Resistive or Inductive Load 12 10 8 NUMBER OF CYCLES AT 60Hz 0 50 100 150 CASE TEMPERATURE.(°C) FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT. (A) 400 200 100 40 20 10 4 2 1 0.4 0.2 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 FIG.4- TYPICAL REVERSE CHARACTERISTICS 100 A) INSTANTANEOUS REVERSE CURRENT. ( 40 10 Tj =25°C Pulse Width=300 s 1% Duty Cycle Tj =125°C 4 2 1.0 Tj =25°C 0.4 0.2 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FORWARD VOLTAGE (V) 120 FIG.5- TYPICAL JUNCTION CAPACITANCE FIG.5- TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE. (pF) 100 80 60 40 20 0 Tj=25°C 1 5 10 50 100 500 1000 REVERSE VOLTAGE. (V) SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 12/12/2003