RL201

RL201 THRU RL207 GENERAL PURPOSE PLASTIC RECTIFIERS Reverse Voltage – 50 to 1000 Volts Forward Current – 2.0 Amperes Features • • • • • • • • • • • • • High surge current capability 2.0 ampere operation at TA = 75oC with no thermal runaway Low reverse leakage Construction utilizes void-free molded plastic technique. High temperature soldering guaranteed: 250oC/10 seconds, 0.375” (9.5mm) lead length, 5 lbs (2.3kg) tension Case: Molded plastic, DO-15. Terminals: Plated axial leads, solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end. Mounting Position: Any. Mechanical Data Absolute Maximum Ratings and Characteristics @ 25 ℃ unless otherwise specified. Symbols RL201 RL202 RL203 RL204 RL205 RL206 RL207 Units Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward current at TA = 75 OC Peak forward surge current 8.3mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) Maximum instantaneous forward voltage at IFM = 2.0A , TA = 25oC (Note 2) Maximum DC reverse current at rated DC blocking voltage Typical thermal resistance Typical junction capacitance (Note 1) Operating and storage temperature range TA = 25OC TA = 100 OC VF IR RΘJA CJ TJ ,TS 1 5 50 40 20 -65 to +175 O VRRM VRMS VDC I(AV) IFSM 50 35 50 100 70 100 200 140 200 400 280 400 2 70 600 420 600 800 560 800 1000 700 1000 Volts Volts Volts Amps Amps Volts µA C/W pF O C Notes: (1) Measured at 1MHZ and applied reverse voltage of 4volts (2) Pulse test: pulse width 300 uSec, Duty cycle 1%. SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 27/02/2003