RS405L

RS401L THRU RS407L SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIERS Reverse Voltage – 50 to 1000 Volts Forward Current – 4.0 Amperes RS-4L Features • Ideal for printed circuit board • Surge overload rating: 200 amperes peak • Mounting position: Any • Weight:4.8 grams • Molded structure Absolute Maximum Ratings and Characteristics Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. o Symbols Maximum recurrent peak reverse voltage Maximum RMS bridge input voltage Maximum DC blocking voltage Maximum average forward output current O at TA = 75 C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum forward voltage drop per bridge element at 4A DC Typical junction Capacitance (Note) Maximum reverse current at rated DC blocking voltage per element @TA = 25OC O @TA =100 C RS 401L 50 35 50 RS 402L 100 70 100 RS 403L 200 140 200 RS 404L 400 280 400 4 RS 405L 600 420 600 RS 406L 800 560 800 RS 407L 1000 700 1000 Units Volts Volts Volts Amps VRRM VRMS VDC IO IFSM VF CJ 200.0 1 40 10 Amps Volts pF µAmps mAmps O IR T J ,T S 1 -55 to +150 Operating and storage temperature range C Notes: (1) Measured at 1 MHz and applied reverse voltage of 4volts. SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 23/06/2003 RS401L THRU RS407L RATINGS AND CHARACTERISTIC CURVES (RS401L THRU RS407L) PEAK FORWARD SURGE CURRENT,(A) 300 250 200 150 100 50 0 1 2 AVERAGE FORWARD OUTPUT CURRENT,(A) FIG.1-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 8.3 ms Single Half Sine-Wave (JEDEC Methode) FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE 5 4 3 2 1 0 0 Single Phase Half Wave 60Hz Inductive or Resistive Load 5 10 20 50 100 50 100 150 NUMBER OF CYCLES AT 60 Hz CASE TEMPERATURE. ( oC) FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT,(A) 100 10 Tj=25o C INSTANTANEOUS REVERSE CURRENT, (uA) Tj=100o C 1.0 10 Pulse Width=300us 1% Duty Cycle 1 0.1 Tj=25o C 0.01 0 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 20 40 60 80 100 120 140 INSTANTANEOUS FORWARD VOLTAGE,(V) PERCENT OF RATED PEAK REVERSE VOLTAGE (%) SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 23/06/2003