704-15K36T_09

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 561, REV. B 704-15K36T 04-15K36T Transient Voltage Suppressor, Unidirectional FEATURES: ♦ ♦ ♦ ♦ Equivalent Industry Standard Part Numbers –704-15K36T Designed For MIL-STD-704 28 Volt Power Supply Protection Can be supplied with JAN/JANTX parts This series is primarily for use in avionics equipment. It meets all applicable environmental requirements of MIL-S-19500. These 15kW assemblies are designed typically to operate with a minimum source impedance of .25 Ohms for transients. MAXIMUM RATINGS Rating Peak Pulse Power Dissipation Steady State Power Dissipation tclamping Operating & Storage Temp. Forward Surge Current Duty Cycle Condition @ 25 , 1ms 0 Volts to V(BR) 1/120 sec. @ 25 C - Minimum -65 - Maximum 15,000 10 < 1x 10 –12 + 150 300 0.01 Units Watts Watts Second s C Amps % ELECTRICAL CHARACTERISTICS @ 25 Part Number Reverse StandOff Voltage (Note 1) VWM Volts (Test Both Polarities) Minimum Breakdown Voltage @ 10 mA V(BR) Volts Maximum Clamping Voltage @ IPP Vc Volts Maximum Peak Pulse Current (Fig. 2) IPP Amps Maximum Forward Voltage VF @ 8.3 msec. 100A Volts DC Maximum Reverse Leakage @ Vwm ID μA 31.5 100 36 51 300 3.0 704-15K36T Note 1: A device is normally selected according to the reverse “Stand Off Voltage” (VWM) which should be equal to or greater than the DC or continuous peak operating voltage level. Special Voltages available from the factory. • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX (631) 242 9798 • • World Wide Web - www.sensitron.com • E-mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 561, REV. B 704-15K36T MECHANICAL CHARACTERISTICS CASE: Molded Case TERMINAL: Silver Plated Brass POLARITY: Cathode terminal marked with a dot WEIGHT: 38 grams MOUNTING POSITION: Any MECHANICAL DIMENSIONS: In Inches / mm Turret Leads • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX (631) 242 9798 • • World Wide Web - www.sensitron.com • E-mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 561, REV. B 704-15K36T • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX (631) 242 9798 • • World Wide Web - www.sensitron.com • E-mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 561, REV. B 704-15K36T • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX (631) 242 9798 • • World Wide Web - www.sensitron.com • E-mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 561, REV. B 704-15K36T • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX (631) 242 9798 • • World Wide Web - www.sensitron.com • E-mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 561, REV. B 704-15K36T • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX (631) 242 9798 • • World Wide Web - www.sensitron.com • E-mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 561, REV. B 704-15K36T DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX (631) 242 9798 • • World Wide Web - www.sensitron.com • E-mail Address - sales@sensitron.com •