SCP-6141

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET SCP-6141, REV. – ITAR Controlled Component SCP-6141 24V, 2A RELAY/SOLENOID DRIVER FEATURES • • • • • • • • HERMETIC PACKAGE (THROUGH-HOLE OR SMT DIP) -55OC TO 125OC OPERATION MIL-STD-883 SCREENING AVAILABLE MIL-PRF-38534 CLASS H LEVEL DESIGN SELF-RESETTING SHORT CIRCUIT PROTECTION COMMAND AND INHIBIT HCMOS INPUT CONTROL PINS OPEN AND SHORT STATUS HCMOS OUTPUT PINS. OUTPUT PROTECTION FOR INDUCTIVE KICKBACK MAXIMUM RATINGS Parameter Input Voltage Operating Temperature Range Storage Temperature Range Short circuit duration Conditions - - Maximum 32 -55 to +150 -65 to +150 indefinite Units Vdc °C °C ELECTRICAL CHARACTERISTICS All ratings are at TC = 25°C unless otherwise specified. Symbol Parameter Conditions Vin Supply Voltage VinL input logic low VinH input logic high VoutL ouput logic low VoutH output logic high tr rise time tf fall time Ishort short circuit current Vdrop Voltage drop Min. 18 3.4 4.0 3.0 Max. 32 0.8 5.5 0.4 20 20 4.0 0.6 Units V V V V V μs μs A V • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 • • World Wide Web - www.sensitron.com • E-mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET SCP-6141, REV. – SCP-6141 TRUTH TABLE OPEN * 1 0 NORMAL 0 0 0 SHORT 0 0 0 OPEN * 1 0 NORMAL 0 0 0 SHORT 0 0 0 OPEN Vin 0 0 NORMAL Vin 0 0 SHORT 0 0 1 OPEN * 1 0 NORMAL * 0 0 SHORT 0 0 0 *Floating output condition. The output current is limited to 1mA to provide for open circuit sensing when inactive. INH_ 0 0 0 0 0 0 1 1 1 1 1 1 CMD_ 0 0 0 1 1 1 0 0 0 1 1 1 LOAD VOUT OPEN SHORT BLOCK DIAGRAM CURRENT SENSE SWITCH ELEMENT IN OUT TEMPERATURE COMPENSATION TRANSIENT PROTECTION DC-DC CONVERTER PERIODIC SAMPLING LOGIC IN LOGIC CIRCUIT LOGIC STATUS • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 • • World Wide Web - www.sensitron.com • E-mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET SCP-6141, REV. – SCP-6141 PINOUT TABLE PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 FUNCTION Vout Vout Vout CMD_ INPUT INH_ INPUT GND GND GND NC NC NC SHORT STATUS OPEN STATUS Vin Vin Vin MECHANICAL DIMENSIONS* (inches) : (tolerance +/- 0.005 unless otherwise specified) YYWW = DATE CODE *Surface mount package shown. Through-hole DIP available. Consult factory. Leads available with gold termination or Pb-Sn hot solder dip. • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 • • World Wide Web - www.sensitron.com • E-mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET SCP-6141, REV. – SCP-6141 DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 • • World Wide Web - www.sensitron.com • E-mail Address - sales@sensitron.com •