SEN-5806

SENSITRON SEMICONDUCTOR TECHNICAL DATA, Rev- SEN-5806 HERMETIC POWER SCHOTTKY RECTIFIER Applications: • Switching Power Supply • Converters • Free-Wheeling Diodes • Polarity Protection Diode Features: • • • • • • • Soft Reverse Recovery at Low and High Temperature Very Low Forward Voltage Drop Low Power Loss, High Efficiency High Surge Capacity Guard Ring for Enhanced Durability and Long Term Reliability Guaranteed Reverse Avalanche Characteristics Includes 100% screening, Group A and Group B testing on the finished part in accordance with MIL-PRF-19500 for TX level parts. JAN and TXV level also available Mechanical Dimensions: In Inches / mm .149 (3.78 Dia. .139 3.53) .545 (13.84 .535 13.60) .260 .249 .050 .040 (6.60 6.32) (1.27 1.02) .685 (17.40 .665 16.89) 1.235 (31.37 1.195 30.35) .800 (20.32 .790 20.07) .545 (13.84 .535 13.58) 1 2 3 .045 (1.14 .035 0.89) 3 Places .150(3.81) BSC 2 Places .150(3.81) BSC TO-254 PINOUT TABLE TYPE DUAL RECTIFIER, COMMON CATHODE DUAL RECTIFIER, COMMON ANODE (R) PIN 1 ANODE 1 CATHODE 1 PIN 2 COMMON CATHODE COMMON ANODE PIN 3 ANODE 2 CATHODE 2 SCHEMATIC COMMON CATHODE COMMON ANODE • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR SEN-5806 TECHNICAL DATA, Rev- Maximum Ratings: Characteristics Peak Inverse Voltage Max. Average Forward Current (Total Package) * Max. Peak One Cycle NonRepetitive Surge Current (Per Leg) Non-Repetitive Avalanche Energy (Per Leg) * Symbol VRWM IF(AV) IFSM EAS Condition 50% duty cycle @TC =100°C, rectangular wave form 8.3 ms, half Sine pulse TJ = 25 °C, IAS = 2.0 A, L = 0.26 mH Max. 45 30 300 0.54 Units V A A mJ Derate linearly at 300 mA/ °C from TJ = TC = +100 °C to +150 °C. 300 mA /°C times 50 °C = 15 A, the device rating. Electrical Characteristics: Characteristics Max. Forward Voltage Drop (Per Leg) Symbol VF1 VF2 VF3 VF4 IR1 IR2 Max. Junction Capacitance (Per Leg) Max. Voltage Rate of Change (Per Leg) CT dv/dt Condition @ 5 A, Pulse, TJ = 25 °C @ 15 A, Pulse, TJ = 25 °C @ 30 A, Pulse, TJ = 25 °C @ 15 A, Pulse, TJ = -55 °C @VR = 45 V, Pulse, TJ = 25 °C @VR = 45V, Pulse, TJ = 125 °C @VR = 5V, TC = 25 °C fSIG = 1MHz, VSIG = 50mV (p-p) Max. 0.55 0.75 1.00 0.80 1.0 40 2000 10,000 Units V Max. Reverse Current (Per Leg) V mA mA pF V/µs Thermal-Mechanical Specifications: Characteristics Max. Junction Temperature Max. Storage Temperature Maximum Thermal Resistance Junction to Case (Per Leg) Case Style Symbol TJ Tstg RθJC Condition DC operation Specification -65 to +150 -65 to +150 1.65 Units °C °C °C/W Hermetic TO-254 • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR SEN-5806 TECHNICAL DATA, RevTypical Forward Characteristics 10 1 (mA) Typical Reverse Characteristics 150 °C 10 0 Instantaneous Reverse Current - I R 101 125 °C 100 °C 75 °C 150 °C (A) 10-1 F Instantaneous Forward Current - I 10-2 50 °C 10-3 125 °C 100 25 °C 10-4 0 10 25 °C 20 30 Reverse Voltage - VR (V) 40 50 Typical Junction Capacitance Junction Capacitance - C T (pF) 800 700 600 500 400 300 200 0 10 20 30 40 Reverse Voltage - VR (V) 50 10 -1 0.0 0.2 0.4 0.6 Forward Voltage Drop - V F (V) 0.8 • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA, RevTypical Thermal Resistance 101 SEN-5806 Thermal Impedance - Z thJC (°C/W) 100 10-1 10-2 10-4 10-3 10-2 10-1 100 101 102 Single Rectangular Pulse Duration (sec) DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •