SEN-R-1050-033

SENSITRON SEMICONDUCTOR TECHNICAL DATA SHEET 4199, REV. - SEN-R-1050-XXX TRANSIENT VOLTAGE SUPPRESSOR 5000 WATT SERIES GLASS PASSIVATED DIE/CELL FEATURES • • • • • • • 5000W peak pulse power dissipation Glass passivated junction Low incremental surge resistance Excellent clamping capability Repetition rate (duty cycle): 0.05% Fast response time: typically less than 1.0 ps Typical IR less than 1µA above 10V DESCRIPTION This is a transient voltage suppressor series extending from 5.0 volts to 100 volts. It is available in either uni-directional or bi-directional configurations. The cell version is available in a Type 1 configuration with double tabs. A Type 2 configuration with silicone edge protection protecting the edge of the die and the die cavity between the double tabs is also available as a custom option. APPLICATIONS ü ü ü ü Power Supply Surge Protection Data Link Surge Protection Lightning Transient Suppression Electrostatic Protection ELECTRICAL CHARACTERISTICS PARAMETER Peak Pulse Power Electrical Parameters Maximum Solder Temperature Operating & Storage Temperature Tmax 10 Second exposure Tj, Tstg -55 SYMBOL Pppm Test Conditions TA = 25 8 C, Tp = 1 ms (Note 1) Min 5000 TYP See Table Max Unit Watts 8C 8C 250 175 Note 1: Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 8 C per Fig. 2. B D G A C F E CHIP TVS T1 CELL TVS T2 CELL A B C D E F G 220 13.5 277 98 305 277 98 Note 1: All dimension in MIL Note 2: The dimension is for low voltage parts (40V). • 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA SHEET 4199, REV. - SEN-R-1050-XXX Note 2: Die only configuration requires user to provide adequate energy absorption. SEN-R-1050-XXX Part Number Vr (V) SEN-R-1050-001 SEN-R-1050-002 SEN-R-1050-003 SEN-R-1050-004 SEN-R-1050-005 SEN-R-1050-006 SEN-R-1050-007 SEN-R-1050-008 SEN-R-1050-009 SEN-R-1050-010 SEN-R-1050-011 SEN-R-1050-012 SEN-R-1050-013 SEN-R-1050-014 SEN-R-1050-015 SEN-R-1050-016 SEN-R-1050-017 SEN-R-1050-018 SEN-R-1050-019 SEN-R-1050-020 SEN-R-1050-021 SEN-R-1050-022 SEN-R-1050-023 SEN-R-1050-024 SEN-R-1050-025 SEN-R-1050-026 SEN-R-1050-027 SEN-R-1050-028 SEN-R-1050-029 SEN-R-1050-030 SEN-R-1050-031 SEN-R-1050-032 SEN-R-1050-033 SEN-R-1050-034 SEN-R-1050-035 SEN-R-1050-036 SEN-R-1050-037 SEN-R-1050-038 SEN-R-1050-039 SEN-R-1050-040 SEN-R-1050-041 SEN-R-1050-042 SEN-R-1050-043 SEN-R-1050-044 SEN-R-1050-045 SEN-R-1050-046 SEN-R-1050-047 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 60.0 64.0 70.0 75.0 78.0 85.0 90.0 100.0 110.0 120.0 130.0 150.0 160.0 170.0 180.0 5000 Watt TVS Series Ir max Iz (mA) 50 50 50 50 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Vz min @ Iz (V) 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.00 11.10 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 22.20 24.00 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 66.70 71.10 77.80 83.30 86.70 94.40 100.00 110.00 122.00 133.00 144.00 167.00 178.00 189.00 200.00 Vz max @ Iz (V) 7.00 7.37 7.98 8.60 9.21 9.83 10.40 11.10 12.30 13.50 14.70 15.90 17.20 18.50 19.70 20.90 22.10 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 73.70 78.60 86.00 92.10 95.80 104.00 111.00 123.00 135.00 147.00 159.00 185.00 197.00 209.00 233.00 Vcc (V) 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 243.0 259.0 275.0 289.0 Ip (A) 544.0 486.0 447.0 417.0 388.0 368.0 348.0 325.0 295.0 275.0 252.0 233.0 216.0 205.0 193.0 181.0 172.0 154.0 141.0 129.0 119.0 110.0 103.0 93.9 86.1 77.6 72.1 68.8 64.7 60.7 57.5 53.5 51.7 48.6 44.3 41.4 39.7 36.5 34.3 30.9 28.3 26.0 24.0 20.6 19.3 18.2 17.3 @ Vr (uA) 10000 10000 4000 2000 500 300 100 40 30 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 • 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA SHEET 4199, REV. PPPM -Peak Pulse Power (kW) 100 Non -repetitive pulse waveform shown in Fig.3 TA = 25°C SEN-R-1050-XXX 100 PPPM -Peak Pulse Power (kW) 75 10 50 1 25 0.1 0.1 1.0 10.0 100.0 1000.0 10000.0 0 0 25 50 75 100 125 150 175 200 t d - Pulse Width (sec.) TA - Ambient Temperature (°C) Fig. 1 - Peak Pulse Power Rating Curve 150 Fig.2 - Pulse Derating Curve CJ, Junction Capacitance 100000 IPPM - Peak Pulse Current,% 100 tr = 10µsec. Peak Value IPPM TJ = 25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM TJ = 25°C f = 1MHZ Vsig = 50mVp -p Measured at Zero Bias Measured at Stand-off voltage Vwm 10000 50 td 10/1000µsec.Waveform as defined by R.E.A. 1000 0 0.0 1.0 2.0 3.0 4.0 100 1 10 100 VBR - Breakdown Voltage (V) 1000 t - Time(ms) Fig.3 - Pulse Waveform 8 Fig. 4 - Typical Junction Capacitance IFSM,Peak Forward Surge Currnet (A) 500 450 400 350 300 250 200 1 10 100 PPM(AV),Steady State Power Dissipation (W) 60Hz Resistive or Inductive Load 6 8.3ms Single Half Sine-Wave (JEDEC Method) 4 2 0 0 25 50 75 100 125 150 175 200 TL - Lead Temperature (°C) Number of Cycles at 60 HZ Fig. 5 - Steady State Power Derating Curve Fig.6 - Maximum Non- repetitive Forward Surge current • 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •