SEN-R-956-XXX

SENSITRON SEMICONDUCTOR SEN-R-956-XXX TECHNICAL DATA SHEET 4200…SURFACE MOUNT DIE WITH HEAT ABSORBING STANDOFF TERMINAL STRIPS TRANSIENT VOLTAGE SUPPRESSOR 500 WATT SERIES Glass Passivated Die Plus Dual Heat Strips Features: • • • • • • • • Description: This is a bipolar transient voltage suppressor series extending from 6.8 volts to 200 volts intended for surface mount applications. Each device comes as a “Cell” with its own heat absorbing terminals pre-bonded at high temperature. This permits mounting on printed circuit boards that cannot provide their own heat sinking. Each terminal is silver plated and is solderable permitting solder down attachment with a very small footprint. Each unit is bi-symmetrical so any orientation can be used. Low Profile Broad Voltage Range Available - - 6.8 to 200 Volts Broad Spectrum Transient Suppression Rapid Response - - 4 nanoseconds typical Built-in Heat Absorbing Terminations Electrically Similar to Mil-Prf-19500/516 Applications: Connector I/O Surge Suppression Data Line Protection ELECTRICAL CHARACTERISTICS PARAMETER Response Turn-on Time Transient Energy Pulse (Cell) Transient Energy Pulse (Cell) Transient Energy Pulse (Cell) Transient Energy Pulse (Cell) Transient Energy Pulse (Cell) Electrical Parameters Maximum Solder Temperature Thermal Resistance (J-C) S YMBOL ton Ep 1 Ep 2 Ep 3 Ep 4 Ep 5 Test Conditions 10uS rise, I= 0.5Ip at t=100us (exponential decay) 10uS rise, I= 0.5Ip at t=1.0mS (exponential decay) 10uS rise, I= 0.5Ip at t=10mS (exponential decay) 10uS rise, I= 0.5Ip at t=50mS (exponential decay) 10uS rise, I= 0.5Ip at t=50mS (step pulse) Min 1500 500 150 70 50 TYP 2 Max. 5 Units ns W W W W W See Table Tmax ΤJC 10 second exposure Assume heat sink on terminal strip ends 18 300 30 ºC ºC/W • 221 West Industry Court 3 Deer Park, NY 11729-4681 3 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR SEN-R-956-XXX 0.048" 0.052" Bipolar Die Only 0.034" 0.039" 0.0115" 0.0155" 0.020" Typ 0.069" 0.073" 0.108" 0.112" 0.069" 0.073" 0.052" 0.056" Note 1: “Die Only” configuration requires user to provide adequate energy absorption. Note 2: Terminal strips are 0.009” to 0.011” thick copper with nickel and silver plate. • 221 West Industry Court 3 Deer Park, NY 11729-4681 3 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR SEN-R-956-XXX SEN-R-956-XXX 500Watt TVS Series Part Number SEN-R-956-001 SEN-R-956-002 SEN-R-956-003 SEN-R-956-004 SEN-R-956-005 SEN-R-956-006 SEN-R-956-007 SEN-R-956-008 SEN-R-956-009 SEN-R-956-010 SEN-R-956-011 SEN-R-956-012 SEN-R-956-013 SEN-R-956-014 SEN-R-956-015 SEN-R-956-016 SEN-R-956-017 SEN-R-956-018 SEN-R-956-019 SEN-R-956-020 SEN-R-956-021 SEN-R-956-022 SEN-R-956-023 SEN-R-956-024 SEN-R-956-025 SEN-R-956-026 SEN-R-956-027 SEN-R-956-028 SEN-R-956-029 SEN-R-956-030 SEN-R-956-031 SEN-R-956-032 SEN-R-956-033 SEN-R-956-034 SEN-R-956-035 SEN-R-956-036 SEN-R-956-037 SEN-R-956-038 SEN-R-956-039 SEN-R-956-040 SEN-R-956-041 SEN-R-956-042 SEN-R-956-043 SEN-R-956-044 SEN-R-956-045 SEN-R-956-046 Nominal Vz (V) 6.8 7.2 7.8 8.4 9.0 9.6 10 11 12 13 14 15 17 18 19 20 22 24 26 29 31 33 36 39 43 48 51 54 57 61 65 69 72 76 84 90 93 101 108 120 131 143 155 180 192 203 Iz (mA) 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Vz min Vz max TC (nom) @ Iz @ Iz of Vz (V) (V) (%.°C) 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.00 11.10 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 22.20 24.40 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.7 60.0 64.4 66.7 71.1 77.8 83.3 86.7 94.4 100.0 111.0 122.0 133.0 144.0 167.0 178.0 189.0 7.25 7.67 8.30 8.95 9.58 10.23 10.82 11.50 12.80 14.00 15.50 16.50 17.90 19.20 20.50 21.70 23.30 25.50 28.00 30.70 33.20 35.80 38.30 42.20 46.00 51.10 54.90 57.50 61.30 65.2 69.0 74.1 76.7 81.8 89.5 95.8 99.7 108.2 115.5 128.0 140.5 153.0 165.5 192.5 205.0 217.5 0.050 0.060 0.060 0.060 0.070 0.070 0.070 0.080 0.080 0.080 0.085 0.085 0.085 0.090 0.090 0.090 0.095 0.095 0.095 0.095 0.095 0.095 0.095 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.105 0.105 0.105 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 Vr (V) 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 60.0 64.0 70.0 75.0 78.0 85.0 90.0 100.0 110.0 120.0 130.0 150.0 160.0 170.0 Ir max @ Vr (uA) 1600 1600 1000 400 200 100 20 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Vcc (V) 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 243.0 259.0 275.0 Ip (A) 54.3 48.5 44.6 41.7 38.8 36.8 34.7 32.5 29.4 27.5 25.1 23.3 21.6 20.5 19.2 18.1 17.1 15.4 14.1 12.9 11.9 11.0 10.3 9.4 8.6 7.8 7.2 6.9 6.5 6.1 5.7 5.3 5.2 4.9 4.4 4.1 4.0 3.6 3.4 3.1 2.8 2.6 2.4 2.1 1.9 1.8 • 221 West Industry Court 3 Deer Park, NY 11729-4681 3 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR SEN-R-956-XXX Clamp Power vs Time for Sensitron 500W TVS Series 100000 1.0 0.9 Exponential Decay Pulse Waveform t rise < 10uS 10000 0.8 0.7 1000 0.6 Ipp/2 at tp=1mS 0.5 0.4 100 0.3 10 0.2 0.1 1 1E-6 1E-5 1E-4 1E-3 1E-2 1E-1 1E+0 0.0 0.0 0.5 1.0 Time (s) 1.5 Time (mS) 2.0 2.5 3.0 Reverse Junction Capacitance for Sensitron 500W TVS 10000 Cap @ V=Vr Cap @ V=0 1000 100 10 1 1 10 100 1000 Rated Vz of Device (V) • 221 West Industry Court 3 Deer Park, NY 11729-4681 3 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •