SHD114211A

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 1047, REV. - SHD114211 SHD114211A SHD114211B (S-100 for JANTXV equivalent screening; SS for JANS equivalent screening available) DESCRIPTION: A 30 VOLT, 15 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC SHD-3/3A/3B PACKAGE. MAXIMUM RATINGS RATING PEAK INVERSE VOLTAGE MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 C) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t=8.3ms, Sine) MAXIMUM JUNCTION CAPACITANCE (Vr =5V) CT ¢ POWER SCHOTTKY RECTIFIER Very Low Voltage Drop ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED. ¡ SYMBOL PIV O MAX. 30 15 280 UNITS Volts Amps Amps IO IFSM 1100 0.85 -65 to + 150 pF •C/W •C MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode) MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE R JC Top/Tstg ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 15 Amps) TJ = 125 •C MAXIMUM REVERSE CURRENT (Ir @ 30V PIV) TJ = 25 •C TJ = 25 •C Vf 0.49 0.39 2.0 100 mA Volts SYMBOL MAX. UNITS Ir TJ = 125 •C   221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web - http://www.sensitron.com E-mail Address - sales@sensitron.com               SENSITRON DATA SHEET 1047, REV. - SHD114211 SHD114211A SHD114211B MECHANICAL DIMENSIONS: In Inches / mm .410±.010 (10.4±.254) .550±.020 (14.0±.508) .410±.010 (10.4±.254) .560±.020 .410±.010 (10.4±.254) (14.2±.508) .150±.010 (3.81±.254) .410±.010 (10.4±.254) .410±.010 (10.4±.254) .200±.010 (5.08 ±.254) .410±.010 (10.4±.254) .015±.005 (.381±.127) .075 (1.91) Max Alumina Ring Moly Lid .020±.005 R (.508±.127 ) Copper Anode .090 (2.29) Max Alumina Ring Moly Base (Cathode) .015±.002 (.381±.051) .060±.010 (1.52±.254) .020±.005 R (.508±.127 ) .075 (1.91) Max Alumina Ring Moly Base Moly Lid Moly Base (Cathode) Moly Anode .020±.002 (.508±.051) .060±.010 (1.52±.254) SHD-3 PINOUT TABLE TYPE SINGLE RECTIFIER SHD-3A SHD-3B PIN 1 (Base) CATHODE PIN 2 ANODE Typical Forward Characteristics Typical Reverse Characteristics 102 Instantaneous Reverse Current - I R (mA) 150 ° C 125 ° C 150 ° C 101 Instantaneous Forward Current - I F (A) 10 1 100 ° C 100 75 ° C 50 ° C 10-1 25 ° C 10-2 0 10 20 30 Reverse Voltage - VR (V) 40 100 125 ° C 25 ° C Junction Capacitance - CT (pF) 1000 900 800 700 600 0 Typical Junction Capacitance 10 -1 0.0 0.1 0.2 0.3 0.4 0.5 Forward Voltage Drop - VF (V) 0.6 10 20 30 Reverse Voltage - VR (V) 40   221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web - http://www.sensitron.com E-mail Address - sales@sensitron.com               SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •