SHD115413_11

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 796, REV. B SHD115413 SHD115413B POWER SCHOTTKY RECTIFIER Very Low Voltage Drop DESCRIPTION: A 60 VOLT, 30 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC SHD-2/2B PACKAGE. MAXIMUM RATINGS RATING PEAK INVERSE VOLTAGE MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 C) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t = 8.3ms, Sine) MAXIMUM JUNCTION CAPACITANCE (Vr = 5V) MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode) CT R JC O ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED. SYMBOL PIV IO IFSM MAX. 60 40 320 UNITS Volts Amps Amps 1600 0.9 pF C/W MAXIMUM OPERATING TEMPERATURE RANGE MAXIMUM STORAGE TEMPERATURE RANGE Top Tstg -65 to + 150 -65 to + 150 C C ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 30 Amps) TJ = 25 C TJ = 125 C MAXIMUM REVERSE CURRENT (Ir @ 60V PIV) TJ = 25 C TJ = 125 C Ir 1.7 96 mA Vf 0.63 0.59 Volts SYMBOL MAX. UNITS 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com sales@sensitron.com SHD115413 SHD115413B SENSITRON DATA SHEET 796, REV. B MECHANICAL DIMENSIONS: In Inches / mm .315±.010 (8.00±.254) .315±.010 (8.00±.254) .465±.020 (11.8±.508) .150±.010 (3.81±.254) .315±.010 (8.00±.254) .315±.010 (8.00±.254) .015±.005 (.381±.127) Copper Anode .090 (2.29) Max Alumina Ring .020±.005 R (.508±.127 ) .075 (1.91) Max Alumina Ring Moly Base Moly Lid Moly Base (Cathode) .015±.002 (.381±.051) .060±.010 (1.52±.254) SHD-2 PINOUT TABLE TYPE SINGLE RECTIFIER Typical Forward Characteristics 102 102 Instantaneous Reverse Current - I R (mA) SHD-2B PIN 1 (Base) CATHODE Typical Reverse Characteristics PIN 2 ANODE 150 °C 125 °C 100 °C 101 150 °C 100 Instantaneous Forward Current - I F (A) 75 °C 50 °C 10 1 10-1 125 °C 10-2 25 °C 10-3 25 °C 100 Junction Capacitance - CT (pF) 1500 1400 1300 1200 1100 1000 900 800 700 600 500 0 10 20 30 40 Reverse Voltage - R (V) V 50 60 Typical Junction Capacitance 10-1 0 .0 0.2 0.4 0.6 Forward Voltage Drop - F (V) V 0.8 0 10 20 30 40 Reverse Voltage - R (V) V 50 60 Vf curves shown are for SD175SA60. 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com sales@sensitron.com SHD115413 SHD115413B SENSITRON DATA SHEET 796, REV. B DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the late st version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause durin g operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsib ility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their applic ation will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any th ird party. When exporting these products (technologies), the necessary procedures are to be taken in accordance w ith related laws and regulations. 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com sales@sensitron.com