SHD115524B

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 628, REV. B Formerly part number SHD1154/A/B SHD115524 SHD115524B HERMETIC POWER SCHOTTKY RECTIFIER Very Low Voltage Drop DESCRIPTION: 100 VOLT, 45 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC SHD-2/2B PACKAGE. MAXIMUM RATINGS RATING PEAK INVERSE VOLTAGE ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED. SYMBOL PIV O MAX. 100 45 200 UNITS Volts Amps Amps MAXIMUM DC OUTPUT CURRENT @ TC=100 C MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t = 8.3ms, Sine) (per leg) MAXIMUM THERMAL RESISTANCE (per leg) MAXIMUM JUNCTION TEMPERATURE RANGE MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE IO IFSM R JC 0.7 -65 to + 175 -65 to + 175 C/W C C Top Tstg ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 45 Amps) (per leg) TJ = 25 C TJ = 125 C MAXIMUM REVERSE CURRENT (Ir @ 100V PIV) (per leg) TJ = 25 C TJ = 125 C MAXIMUM JUNCTION CAPACITANCE (Vr =5V) (per leg) CT Ir 1.5 20 1400 pF mA Vf 0.89 0.70 Volts SYMBOL MAX. UNITS 1999 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com sales@sensitron.com SHD115524 SHD115524B SENSITRON DATA SHEET 628, REV. B MECHANICAL DIMENSIONS: In Inches / mm .315±.010 (8.00±.254) .315±.010 (8.00±.254) .465±.020 (11.8±.508) .150±.010 (3.81±.254) .315±.010 (8.00±.254) .315±.010 (8.00±.254) .015±.005 (.381±.127) Copper Anode .090 (2.29) Max Alumina Ring .020±.005 R (.508±.127 ) .075 (1.91) Max Alumina Ring Moly Base Moly Lid Moly Base (Cathode) .015±.002 (.381±.051) .060±.010 (1.52±.254) SHD-2 SHD-2B DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the late st version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause durin g operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsib ility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their applic ation will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any th ird party. When exporting these products (technologies), the necessary procedures are to be taken in accordance w ith related laws and regulations. 1999 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com sales@sensitron.com