SHD116123B

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4045, REV. A SHD116123 SHD116123B HERMETIC SCHOTTKY POWER RECTIFIER Low Voltage Drop DESCRIPTION: A 60-VOLT, 7.5 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC SHD-1/1B PACKAGE. MAXIMUM RATINGS RATING PEAK INVERSE VOLTAGE MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 OC) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t = 8.3ms, Sine) MAXIMUM JUNCTION CAPACITANCE (Vr = 5V) MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode) MAXIMUM OPERATING TEMPERATURE RANGE MAXIMUM STORAGE TEMPERATURE RANGE CT RθJC Top Tstg 400 1.7 -65 to + 175 -65 to + 175 pF °C/W °C °C ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED. SYMBOL PIV IO IFSM MAX. 60 7.5 140 UNITS Volts Amps Amps ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 7.5 Amps) TJ = 25 °C TJ = 125 °C MAXIMUM REVERSE CURRENT (Ir @ 60V PIV) TJ = 25 °C TJ = 125 °C Ir 0.2 15 mA Vf 0.64 0.57 Volts SYMBOL MAX. UNITS • 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4045, REV. A SHD116123 SHD116123B MECHANICAL DIMENSIONS: In Inches / mm .225± .0 10 (5 .71± .2 54) .225±.010 (5.71±.254) .375±.020 (9.52±.508) .150±.010 (3.81±.254) . 2 25± .01 0 (5.71± .25 4) .225±.010 (5.71±.254) .015±.005 (.381±.127) Copper Anode .090 (2.29) Max .07 5 (1 .91) M ax A lum ina R ing M o ly B a se M oly Lid Alumina Ring Moly Base (Cathode) .020±.005 R (.508±.127 ) .015±.002 (.381±.051) .060±.010 (1.52±.254) SHD-1 PINOUT TABLE TYPE SINGLE RECTIFIER in a Surface Mount Package PIN 1 (Base) CATHODE SHD-1B PIN 2 ANODE DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •