SHD117012PA

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4564, REV. – SHD117012(P/N) SHD117012(P/N)A SHD117012(P/N)B HERMETIC POWER SCHOTTKY RECTIFIER Very Low Forward Voltage Drop Add Suffix "S" to Part Number for S-100 Screening. Applications: • Switching Power Supply • Converters • Free-Wheeling Diodes • Polarity Protection Diode Features: • • • • Ultra low Reverse Leakage Current Soft Reverse Recovery at Low and High Temperature High Surge Capacity Guard Ring for Enhanced Durability and Long Term Reliability DESCRIPTION: A 45-VOLT, 3.0 AMP DUAL POWER SCHOTTKY RECTIFIER IN A HERMETIC SHD-4/4A/4B PACKAGE. MAXIMUM RATINGS RATING PEAK INVERSE VOLTAGE MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 OC) (Single) MAXIMUM DC OUTPUT CURRENT With Cathode Maintained (@ TC=100 OC) (Common Cathode) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t=8.3ms, Sine) MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode) MAXIMUM OPERATING TEMPERATURE RANGE MAXIMUM STORAGE TEMPERATURE RANGE IFSM RθJC Top/Tstg Top/Tstg 55 1.8 -65 to + 150 -65 to + 150 Amps °C/W °C °C ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED. SYMBOL PIV IO IO MAX. 45 3.0 6.0 UNITS Volts Amps Amps ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 3.0 Amps) TJ = 25 °C TJ = 125 °C MAXIMUM REVERSE CURRENT (Ir @ 45V PIV) TJ = 25 °C TJ = 125 °C MAXIMUM JUNCTION CAPACITANCE (Vr =5V) Ir CT 0.3 14 220 mA pF Vf 0.56 0.51 Volts SYMBOL MAX. UNITS • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com • SENSITRON DATA SHEET 4564, REV. Mechanical Dimensions: In Inches / mm .290±.010 (7.37±.254) .290±.010 (7.37±.254) .440±.020 (11.2±.508) .290±.010 (7.37±.254) SHD117012(P/N) SHD117012(P/N)A SHD117012(P/N)B .440±.020 (11.2±.508) 2 .350±.010 (8.89±.254) 3 .020±.010 (.508±.254) .065±.010 (1.65±.254) .090±.010 (2.29±.254) 2 .020±.010 (.508±.254) .350±.010 (8.89±.254) .185±.010 (4.70±.254) .020±.010 (.508±.254) .350±.010 (8.89±.254) 2 .185±.010 (4.70±.254) 3 .110 (2.80) Max Alumina Ring 3 Terminal 1 .110 (2.79) Max Alumina Ring Moly Lid .020±.005 R (.508±.127 ) Copper Terminals .130 (3.30) Max Moly Lid .020±.005 (.508±.127 ) SHD-4 COMMON CATHODE COMMON ANODE Alumina Ring Moly Base Terminal 1 .060±.010 (1.52±.254) .020±.002 (.508±.051) Moly Base Terminal 1 .060±.010 (1.52±.254) .015±.002 (.381±.051) SHD-4A 2 1 32 1 3 PINOUT TABLE DEVICE TYPE DUAL RECTIFIER, COMMON CATHODE (P) DUAL RECTIFIER, COMMON ANODE (N) PIN 1 COMMON CATHODE COMMON ANODE PIN 2 ANODE 1 CATHODE 1 SHD-4B PIN 3 ANODE 2 CATHODE 2 Typical Forward Characteristics Typical Reverse Characteristics Instantaneous Reverse Current - IR (mA) 101 101 150 °C 125 °C 100 °C 10-1 100 150 °C Instantaneous Forward Current - IF (A) 75 °C 100 10-2 50 °C 125 °C 10-3 25 °C 25 °C 0 10 20 30 40 Reverse Voltage - VR (V) 50 Junction Capacitance - CT (pF) 10-1 Typical Junction Capacitance 140 130 120 110 100 90 80 70 60 50 40 10-2 0.0 0.2 0.4 0.6 Forward Voltage Drop - V F (V) 0.8 0 10 20 30 40 Reverse Voltage - VR (V) 50 VF @ 1A -55°C typical = 0.56V • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •