SHD117022N

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4063, REV. – SHD117022(P/N) SHD117022(P/N)A SHD117022(P/N)B HERMETIC POWER SCHOTTKY RECTIFIER Applications: Features: œ œ œ œ Ultra low Reverse Leakage Current Soft Reverse Recovery at Low and High Temperature High Surge Capacity Guard Ring for Enhanced Durability and Long Term Reliability Add Suffix "S" to Part Number for S-100 Screening. Low Forward Voltage Drop œ Switching Power Supply œ Converters œ Free-Wheeling Diodes œ Polarity Protection Diode DESCRIPTION: A 45-VOLT, 3.0 AMP DUAL POWER SCHOTTKY RECTIFIER IN A HERMETIC SHD-4/4A/4B PACKAGE. ¡ MAXIMUM RATINGS RATING PEAK INVERSE VOLTAGE ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED. SYMBOL PIV O MAX. 45 3.0 55 2.2 -65 to + 175 -65 to + 175 UNITS Volts Amps Amps •C/W •C •C MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 C) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t=8.3ms, Sine) MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode) MAXIMUM OPERATING TEMPERATURE RANGE MAXIMUM STORAGE TEMPERATURE RANGE IO IFSM R ¢ JC Top/Tstg Top/Tstg ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 3.0 Amps) TJ = 25 •C TJ = 125 •C Vf 0.64 0.57 0.08 3.0 160 Volts SYMBOL MAX. UNITS MAXIMUM REVERSE CURRENT (Ir @ 45V PIV) TJ = 25 •C TJ = 125 •C (Vr =5V) Ir CT mA pF MAXIMUM JUNCTION CAPACITANCE   221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web - http://www.sensitron.com E-mail Address - sales@sensitron.com               SENSITRON DATA SHEET 4063, REV. .290±.010 (7.37±.254) SHD117022(P/N) SHD117022(P/N)A SHD117022(P/N)B Mechanical Dimensions: In Inches / mm .440±.020 (11.2±.508) .290±.010 (7.37±.254) .290±.010 (7.37±.254) .090±.010 (2.29±.254) .440±.020 (11.2±.508) 2 .350±.010 (8.89±.254) 3 .020±.010 (.508±.254) .065±.010 (1.65±.254) 2 .020±.010 (.508±.254) .350±.010 (8.89±.254) .185±.010 (4.70±.254) .020±.010 (.508±.254) .350±.010 (8.89±.254) 2 .185±.010 (4.70±.254) 3 3 .110 (2.80) Max Alumina Ring Terminal 1 .110 (2.79) Max Alumina Ring Moly Lid SHD-4 COMMON CATHODE COMMON ANODE .020±.005 R (.508±.127 ) Copper Terminals .130 (3.30) Max Alumina Ring Moly Lid .020±.005 (.508±.127 ) Moly Base Terminal 1 .060±.010 (1.52±.254) .020±.002 (.508±.051) Moly Base Terminal 1 .060±.010 (1.52±.254) .015±.002 (.381±.051) SHD-4A 2 1 32 1 3 PINOUT TABLE DEVICE TYPE DUAL RECTIFIER, COMMON CATHODE (P) DUAL RECTIFIER, COMMON ANODE (N) Typical Forward Characteristics 101 101 Instantaneous Reverse Current - I R (mA) SHD-4B PIN 2 ANODE 1 CATHODE 1 PIN 3 ANODE 2 CATHODE 2 PIN 1 COMMON CATHODE COMMON ANODE Typical Reverse Characteristics 175 ° C 150 ° C 125 ° C 100 ° C 75 ° C 50 ° C 175 ° C 100 10 -1 Instantaneous Forward Current - I F (A) 10-2 10-3 25 ° C 10 -4 125 ° C 100 0 10 20 30 Reverse Voltage - VR (V) 40 50 25 ° C Junction Capacitance - CT (pF) 150 125 100 75 50 0 Typical Junction Capacitance 0.2 0.3 0.4 0.5 0.6 0.7 Forward Voltage Drop - V F (V) 0.8 10 20 30 Reverse Voltage - VR (V) 40 50 VF @ 1A -55•C typical = 0.56V   221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web - http://www.sensitron.com E-mail Address - sales@sensitron.com               SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •