SHD117144_11

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 631, REV. A SHD117144 SHD117144B HERMETIC POWER SCHOTTKY RECTIFIER 200 C Maximum Operation Temperature DESCRIPTION: 100 VOLT, 7.5 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC SHD-4/4A/4B PACKAGE. MAXIMUM RATINGS RATING PEAK INVERSE VOLTAGE ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED. SYMBOL PIV O MAX. 100 15 140 UNITS Volts Amps Amps MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 C) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (PER LEG) (t=8.3ms, Sine) MAXIMUM JUNCTION CAPACITANCE (Vr =5V) (PER LEG) MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode) MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE IO IFSM CT R JC 250 0.9 -65 to + 175 pF C/W C Top/Tstg ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 7.5 Amps) (PER LEG) TJ = 25 C TJ = 125 C MAXIMUM REVERSE CURRENT (Ir @ 100V PIV) (PER LEG) TJ = 25 C TJ = 125 C Ir 0.18 4.0 mA Vf 0.84 0.68 Volts 1999 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com sales@sensitron.com SHD117144 SHD117144B SENSITRON DATA SHEET 631, REV. A Mechanical Dimensions: In Inches / mm .290±.010 (7.37±.254) .290±.010 (7.37±.254) .440±.020 (11.2±.508) 2 .350±.010 (8.89±.254) .020±.010 (.508±.254) .090±.010 (2.29±.254) 2 .020±.010 (.508±.254) 3 .350±.010 (8.89±.254) .185±.010 (4.70±.254) 3 .110 (2.80) Max Alumina Ring Terminal 1 Copper Terminals .130 (3.30) Max Moly Lid .020±.005 (.508±.127 ) SHD-4 COMMON CATHODE Alumina Ring Moly Base Terminal 1 .060±.010 (1.52±.254) .015±.002 (.381±.051) SHD-4B 2 1 3 PINOUT TABLE TYPE DUAL RECTIFIER, COMMON CATHODE (P) PIN 1 COMMON CATHODE PIN 2 ANODE 1 PIN 3 ANODE 2 Typical Forward Characteristics 101 Typical Reverse Characteristics Instantaneous Reverse Current - I R (mA) 101 100 200°C 175 °C 200 °C 10-1 150 °C 125 °C 175 °C Instantaneous Forward Current - I F (A) 10 0 10-2 100 °C 75 °C 50 °C 25 °C 10-3 10-4 10-1 125 °C 10-5 0 20 40 60 80 100 Reverse Voltage - R (V) V 120 Typical Junction Capacitance Junction Capacitance - C T (pF) 0.8 25 °C 10-2 250 200 150 100 50 0 0 20 40 60 80 100 Reverse Voltage - R (V) V 120 10-3 0 .1 0.2 0.3 0.4 0.5 0.6 0.7 Forward Voltage Drop -FV(V) 1999 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com sales@sensitron.com SHD117144 SHD117144B SENSITRON DATA SHEET 631, REV. A DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the late st version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause durin g operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsib ility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their applic ation will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any th ird party. When exporting these products (technologies), the necessary procedures are to be taken in accordance w ith related laws and regulations. 1999 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com sales@sensitron.com