SHD117212P

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4039, REV. A SHD117212P SHD117212PA SHD117212PB POWER SCHOTTKY RECTIFIER Very Low Voltage Drop DESCRIPTION: A DUAL 45-VOLT, 15 AMP POWER SCHOTTKY RECTIFIER IN A HERMETIC SHD-4/4A/4B PACKAGE MAXIMUM RATINGS RATING PEAK INVERSE VOLTAGE MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 C) (Common Cathode) (per leg) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t=8.3ms, Sine) MAXIMUM JUNCTION CAPACITANCE (Vr =5V) CT ¡ ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED.   SYMBOL PIV O MAX. 45 15 280 UNITS Volts Amps Amps IO IFSM 800 0.85 -65 to + 150 pF •C/W •C MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode) MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE R JC Top/Tstg ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 15 Amps) TJ = 125 •C MAXIMUM REVERSE CURRENT TJ = 25 •C (Ir @ 45V) Ir 1.5 70 mA TJ = 25 •C Vf 0.56 0.51 Volts SYMBOL MAX. UNITS TJ = 125 •C œ 221 West Industry Court 3 Deer Park, NY 11729-4681 3 (631) 586-7600 FAX (631) 242-9798 œ œ W orld Wide Web Site - http://www.sensitron.com œ E-Mail Address - sales@sensitron.com œ SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4039, REV. A .290±.010 SHD-4 (7.37±.254) SHD117212P SHD117212PA SHD117212PB MECHANICAL DIMENSIONS: In Inches / mm .440±.020 (11.2±.508) .290±.010 (7.37±.254) .290±.010 (7.37±.254) .090±.010 (2.29±.254) .440±.020 (11.2±.508) 2 .350±.010 (8.89±.254) 3 .020±.010 (.508±.254) .020±.010 (.508±.254) .350±.010 (8.89±.254) .065±.010 (1.65±.254) 2 .020±.010 (.508±.254) 2 .185±.010 (4.70±.254) 3 .350±.010 (8.89±.254) .185±.010 (4.70±.254) 3 .110 (2.80) Max Alumina Ring Terminal 1 .110 (2.79) Max Alumina Ring SHD-2A Moly Base Terminal 1 Moly Lid .020±.005 R (.508±.127 ) Copper Terminals .130 (3.30) Max Alumina Ring Moly Lid .020±.005 (.508±.127 ) SHD-4 .020±.002 (.508±.051) .060±.010 (1.52±.254) Moly Base Terminal 1 .060±.010 (1.52±.254) .015±.002 (.381±.051) SHD-4A Note: VF Curves are shown for die only. Typical Forward Characteristics Instantaneous Reverse Current - IR (mA) 102 SHD-4B Typical Reverse Characteristics 150 ° C 10 1 101 125 ° C 100 ° C 75 ° C 150 ° C 100 Instantaneous Forward Current - IF (A) 10 -1 50 ° C 10-2 125 ° C 100 10-3 25 ° C 25 ° C 0 10 20 30 40 Reverse Voltage - VR (V) 50 Junction Capacitance - CT (pF) Typical Junction Capacitance 800 700 600 500 400 300 200 0 10 20 30 40 Reverse Voltage - VR (V) 50 10-1 0.0 0.2 0.4 0.6 Forward Voltage Drop - VF (V) 0.8 œ 221 West Industry Court 3 Deer Park, NY 11729-4681 3 (631) 586-7600 FAX (631) 242-9798 œ œ W orld Wide Web Site - http://www.sensitron.com œ E-Mail Address - sales@sensitron.com œ SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •