SHD117234B

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 292, REV. A SHD117234 SHD117234A SHD117234B HERMETIC POWER SCHOTTKY RECTIFIER Ultra Low Reverse Leakage DESCRIPTION: 100 VOLT, 30 AMP, DUAL POWER SCHOTTKY RECTIFIER IN A HERMETIC SHD-4/4A PACKAGE. ¡ MAXIMUM RATINGS RATING PEAK INVERSE VOLTAGE ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED. SYMBOL PIV O MAX. 100 30 280 500 0.4 -65 to + 175 UNITS Volts Amps Amps pF •C/W •C MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 C) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t = 8.3ms, Sine) MAXIMUM JUNCTION CAPACITANCE MAXIMUM THERMAL RESISTANCE (Vr = 5V, TJ, = 25•C, fSIG = 1MHz, VSIG = 50mV P-P)) (Junction to Case) IO IFSM CT R ¢ JC MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE Top/Tstg ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (per leg, If = 15 Amps) TJ = 125 •C MAXIMUM REVERSE CURRENT (per leg, Ir @ 100V PIV) TJ = 25 •C TJ = 25 •C Vf 0.84 0.68 0.01 1.0 mA Volts SYMBOL MAX. UNITS Ir TJ = 125 •C   221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 W orld Wide Web Site - http://www.sensitron.com E-mail Address - sales@sensitron.com               SENSITRON DATA SHEET 292, REV. A MECHANICAL DIMENSIONS: In Inches / mm .290±.010 (7.37±.254) .290±.010 (7.37±.254) .440±.020 (11.2±.508) .290±.010 (7.37±.254) SHD117234 SHD117234A SHD117234B .440±.020 (11.2±.508) 2 .350±.010 (8.89±.254) 3 .020±.010 (.508±.254) .065±.010 (1.65±.254) 2 .020±.010 (.508±.254) .350±.010 (8.89±.254) .185±.010 (4.70±.254) .020±.010 (.508±.254) .350±.010 (8.89±.254) .090±.010 (2.29±.254) 2 .185±.010 (4.70±.254) 3 3 .110 (2.80) Max Alumina Ring Terminal 1 .110 (2.79) Max Alumina Ring Moly Lid SHD-4 .020±.005 R (.508±.127 ) Copper Terminals .130 (3.30) Max Alumina Ring Moly Lid .020±.005 (.508±.127 ) Moly Base Terminal 1 .060±.010 (1.52±.254) .020±.002 (.508±.051) Moly Base Terminal 1 .060±.010 (1.52±.254) .015±.002 (.381±.051) 2 1 3 SHD-4A PIN 1 COMMON CATHODE PIN 2 ANODE SHD-4B PIN 3 ANODE PINOUT TABLE DEVICE TYPE DUAL RECTIFIER COMMON CATHODE (P) SHD-4, SHD-4A, SHD-4B Typical Forward Characteristics 101 Instantaneous Reverse Current - IR (mA) Typical Reverse Characteristics 200 °C 175 °C 100 150 °C 125 °C 100 °C 101 200 °C 175 °C 10-1 Instantaneous Forward Current - IF (A) 10 -2 75 °C 50 °C 100 10-3 10-4 25 °C 0 20 40 60 80 100 Reverse Voltage - VR (V) 120 125 °C 10-1 Junction Capacitance - CT (pF) 25 °C Typical Junction Capacitance 400 300 200 100 0 20 40 60 80 Reverse Voltage - VR (V) 100 120 10-2 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Forward Voltage Drop - VF (V) 0.8   221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 W orld Wide Web Site - http://www.sensitron.com E-mail Address - sales@sensitron.com               SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •