SHD117246_11

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 830, REV. A SHD117246 SHD117246B HERMETIC POWER SCHOTTKY RECTIFIER 200 C Maximum Operation Temperature Very Low Forward Voltage Drop Applications: Switching Power Supply Converters Free-Wheeling Diodes Polarity Protection Diode Features: Soft Reverse Recovery at Low and High Temperature Very Low Forward Voltage Drop Low Reverse Leakage Current Low Power Loss, High Efficiency High Surge Capacity Guard Ring for Enhanced Durability and Long Term Reliability Guaranteed Reverse Avalanche Characteristics MAXIMUM RATINGS RATING PEAK INVERSE VOLTAGE MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 C) (per leg) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t=8.3ms, Sine) MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode) (per leg) MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE MAXIMUM STORAGE TEMPERATURE RANGE O ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED. SYMBOL PIV IO IFSM R MAX. 200 15 280 1.7 -65 to + 200 -65 to + 175 UNITS Volts Amps Amps C/W C C JC Top/Tstg Top/Tstg ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 15 Amps) TJ = 25 C TJ = 125 C MAXIMUM REVERSE CURRENT (Ir @ 200V PIV) TJ = 25 C TJ = 125 C MAXIMUM JUNCTION CAPACITANCE (Vr =5V) Ir CT 0.35 8.0 300 mA pF Vf 0.92 0.76 Volts 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com sales@sensitron.com SHD117246 SHD117246B SENSITRON DATA SHEET 830, REV. A MECHANICAL DIMENSIONS: in inches / mm .290±.010 (7.37±.254) .290±.010 (7.37±.254) .440±.020 (11.2±.508) 2 .350±.010 (8.89±.254) 3 .020±.010 (.508±.254) .090±.010 (2.29±.254) 2 .020±.010 (.508±.254) .350±.010 (8.89±.254) .185±.010 (4.70±.254) 3 .110 (2.80) Max Alumina Ring Terminal 1 Copper Terminals .130 (3.30) Max Moly Lid .020±.005 (.508±.127 ) SHD-4 COMMON CATHODE Alumina Ring Moly Base Terminal 1 .060±.010 (1.52±.254) .015±.002 (.381±.051) 2 1 3 SHD-4B Typical Reverse Characteristics 101 Typical Forward Characteristics Instantaneous Reverse Current - I R (mA) 200 °C 100 175 °C 150 °C 125 °C 101 200 °C 175 °C 10-1 Instantaneous Forward Current - I F (A) 10 -2 100 °C 75 °C 50 °C 25 °C 100 10-3 10-4 125 °C 10 -1 10-5 0 40 80 120 160 200 Reverse Voltage - R (V) V 240 Typical Junction Capacitance 25 °C Junction Capacitance - C T (pF) 1.0 300 240 180 120 60 0 0 40 80 120 160 200 Reverse Voltage - R (V) V 240 10 -2 0 .0 0.2 0.4 0.6 0.8 Forward Voltage Drop -FV(V) 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com sales@sensitron.com SHD117246 SHD117246B SENSITRON DATA SHEET 830, REV. A DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to impro ve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviatio n, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual proper ty claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulti ng from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their applicat ion will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulat ions. 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com sales@sensitron.com