SHD118436B

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4597, REV. A SHD118436 SHD118436A SHD118436B HERMETIC SCHOTTKY RECTIFIER Low Forward Voltage Drop Features: • • • • • • Soft Reverse Recovery at Low and High Temperature Low Forward Voltage Drop Low Power Loss, High Efficiency High Surge Capacity Guard Ring for Enhanced Durability and Long Term Reliability Guaranteed Reverse Avalanche Characteristics Maximum Ratings Characteristics Peak Inverse Voltage Max. Average Forward Current Max. Average Forward Current Max. Peak One Cycle NonRepetitive Surge Current Non-Repetitive Avalanche Energy Repetitive Avalanche Current Maximum Thermal Resistance Max. Junction Temperature Max. Storage Temperature Symbol VRWM IF(AV) IF(AV) IFSM EAS IAR RθJC TJ Tstg Condition 50% duty cycle, rectangular wave form (Single) 50% duty cycle, rectangular wave form (Common Cathode) 8.3 ms, half Sine wave (per leg) TJ = 25 °C, IAS = 3.0 A, L = 4.4 mH (per leg) IAS decay linearly to 0 in 1 µs ƒ limited by TJ max VA=1.5VR DC operation Max. 200 30 60 570 20 3.0 0.25 -65 to +200 -65 to +200 Units V A A A mJ A °C/W °C °C Electrical Characteristics Characteristics Max. Forward Voltage Drop (per leg) Max. Reverse Current (per leg) Max. Junction Capacitance (per leg) Symbol VF1 VF2 IR1 IR2 CT Condition @ 30A, Pulse, TJ = 25 °C @ 30A, Pulse, TJ = 125 °C @VR = 200V, Pulse, TJ = 25 °C @VR = 200V, Pulse, TJ = 125 °C @VR = 5V, TC = 25 °C fSIG = 1MHz, VSIG = 50mV (p-p) Max. 0.92 0.76 0.2 2.0 600 Units V V mA mA pF • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail - sales@sensitron.com • SHD118436 SHD118436A SHD118436B TECHNICAL DATA DATA SHEET 4597, REV. A MECHANICAL DIMENSIONS: In Inches / mm .370±.010 (9.40±.254) .370±.010 (9.40±.254) .510±.020 SHD-5A (12.9±.508) .370±.010 (9.40±.254) .520±.020 SHD-5B (13.2±.508) 2 .610±.010 (15.5±.254) 3 .030±.010 (.762±.254) .030±.010 (.762±.254) .610±.010 (15.5±.254) .125±.010 (3.17±.254) .090±.010 (2.29±.254) 2 .030±.010 (.762±.254) 2 .320±.010 (8.13±.254) .610±.010 (15.5±.254) .320±.010 (8.13 ±.254) 3 3 .110 (2.80) Max Alumina Ring .110 (2.79) Max Moly Lid Terminal 1 Alumina Ring .020±.005 R (.508±.127 ) Copper Terminals .130 (3.30) Max Moly Lid .020±.005 R (.508±.127 ) Alumina Ring Moly Base Terminal 1 .060±.010 (1.52±.254) .020±.002 (.508±.051) Moly Base Terminal 1 .060±.010 (1.52±.254) .015±.002 (.381±.051) 1 2 3 PINOUT TABLE DEVICE TYPE PIN 1 PIN 2 DUAL RECTIFIER, COMMON CATHODE (P) COMMON CATHODE ANODE Note: The Vf curves shown are for the SD175SCU200 unpackaged die only. Typical Forward Characteristics 101 Instantaneous Reverse Current - I R (mA) PIN 3 ANODE Typical Reverse Characteristics 200 °C 175 °C 150 °C 100 101 200 °C 175 °C 10-1 125 °C 100 °C 75 °C Instantaneous Forward Current - I F (A) 10-2 10-3 100 50 °C 10-4 25 °C 10 -5 125 °C 0 40 80 120 160 Reverse Voltage - VR (V) 200 240 10-1 Junction Capacitance - CT (pF) Typical Junction Capacitance 25 °C 600 450 300 150 0 0 40 80 120 160 Reverse Voltage - VR (V) 200 240 10-2 0.0 0.2 0.4 0.6 0.8 Forward Voltage Drop - V F (V) 1.0 • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail - sales@sensitron.com • SHD118436 SHD118436A SHD118436B TECHNICAL DATA DATA SHEET 4597, REV. A DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail - sales@sensitron.com •